To create static models of actuators, linear or polynomial equations are used. Such models do not provide the necessary accuracy for the entire system, although they give an adequate result in a specific area of the process under consideration. In addition, the technical values of the coefficients in polynomial equations cannot always be explained. Analytical modeling of the static characteristics of the object allows us to analyze the influence of the parameters of the object on the overall model. After the model structure is built, the experimental determination of its coefficients ensures that an adequate model can be achieved faster. In this work, a static model of a membrane pneumatic actuator is constructed by the analytical method. The coefficients of the model parameters were determined experimentally. The model and actual results of the process were comparatively analyzed.
| Mualliflar | F. A. Kasimov, M. Ismailov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2020-07-11 |
| Jild | 2020 |
| Son | 2 |
| Betlar | 1-6 |
| Til | en |
| DOI | 10.51346/tstu-01.20.2-77-0056 |
DOI: 10.51346/tstu-01.20.2-77-0056 · Maqolaning asl sahifasi
The article discusses the improvement of traction and energy performance main-line locomotives due to more complete use of possibilities of flexible microprocessor control and efficient algorithm that provides reduction…
Numerical calculation of electronic and atomic structures of complex systems of crystalline and transitional nano- and micro-sizes by using quantum physical methods will make it possible to forecast new properties of…
For increasing accuracy of a measuring device, before carrying out measurement, implementation of graduation, which consists of the establishment of correlation dependence between indications of the measuring device and…
A unified mathematical model of the power flow in a system containing a reactive component compensator consisting of capacitor banks connected in series to a thyristor control reactor is presented. The application of…
Research of the interaction of rock-cutting tools with rock with various approaches is presented in the article. In contrast to analytical and experimental methods with their limited and costly applicability, it is…
An approach for defining critical temperatures of buckling for a pivotally resting plane cylindrical shell has been considered. Operation in various climatic zones leads to buckling of roof elements of passenger cars…
The article analyzes the operation of the most commonly used dryers for drying sunflowers and other agricultural cereals. Based on the study of drying technology and methods, the advantages and disadvantages of dryers…
This article presents studies of fire resistance in the treatment of expanded vermiculite, which depends on the size of the dispersed particles and the orientation of the granules, their moisture and temperature. It has…
Non-linear elements are widely used in various automation devices, converting and measuring equipment. They are often presented in the form of diode-resistive circuits. In single-circuit electrical circuits, their…
The reactivity of cotton pulp during chemical processing is significantly lower compared to celluloses obtained from other cellulose-containing plants. Increasing the reactivity of cotton cellulose improves the quality…
Тошкент давлат техника университети хабарлари — barcha maqolalar