This article discusses the development of a measurement and control system for monitoring and managing the balance of active and reactive power at power plants based on “Green” energy sources. Monitoring and management of the balance of active and reactive power based on a measurement and control system, calculated expressions are developed to solve the problem of reactive power compensation when transmitting electricity at power plants based on “green” energy sources. Reactive power is calculated based on measured active power, and combined reactive power sources generate the reactive power required by the network based on control signals. Schemes for connecting these reactive power sources to the network have been developed, and this diagram(Scheme) shows the installation of a measurement control device. The schematic block diagram of a measurement control device shows the sequence of the process of measuring and processing electrical data, as well as the generation of control signals. To study the operating principle and elements of a device created to monitor and manage reactive power consumption, a microcontroller, a signal converter and measuring transducers were selected. An algorithm for monitoring and managing the balance of active and reactive power has been developed for the device software. At the same time, equations for separating current, voltage and frequency signals in the phase section were developed.
| Mualliflar | Narzullo Mirzoyev, Siroj Sobirovich Nurov |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2024-06-29 |
| Jild | 2024 |
| Son | 3 |
| Betlar | 26-36 |
| Til | en |
| DOI | 10.59048/2181-1105.1571 |
DOI: 10.59048/2181-1105.1571 · Maqolaning asl sahifasi
In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and…
The work reflects the current state of the technology for obtaining refined vegetable oils and identifies trends in their improvement and further development in the environment of industrial automation using modern…
Here are algorithms for the synthesis of adaptive control systems based on the neural network approach presented. The issues of choice of architectures of neural networks that produce parametric identification of the…
The necessity of automating the control and evaluation of the technical and operational indicators of motor vehicles (ATS) is substantiated. A classification of the main technical and operational indicators of vehicles…
This paper presents a smart system for early detection of wheat plant diseases in the vegetation period. The proposed smart system allows detecting three types of wheat diseases, particularly yellow rust, powdery mildew…
This article discusses the issues of constructing a mathematical model of the technological process of bleaching textile materials in an impregnating reservoir using the heat balance equation, on the basis of which a…
The article discusses the features of a magnetoelastic transformer type transducer. In magnetoelastic transformer-type transducers, mutual inductance is assumed as a variable value, which is a function of the value of…
Innovative technologies for refining vegetable oils are presented, as well as the qualitative characteristics of raw vegetable oils obtained by extraction and mechanical methods. A general review of the chemical…
The article describes the modeling and configuration of a fuzzy controller for the control system of the bacterial oxidation of hard-to-enrich gold-bearing sulfide ores. The simulated logical fuzzy controller allows you…
The article reveals the meaning and essence of the modeling method in the study of complex technological processes based on the problematic aspects of building multifactorial relationships and the principles for their…