The aim of the work is to improve the process of coarse grinding of clay raw materials in the manufacture of ceramic products. To achieve this goal, a comparison was made of existing machines - disintegrator rollers. The result of the work is the development of a design for a roller-type grinder with low energy consumption, a relatively large working volume and a grinding fineness of 0.5-1 mm with a maximum feedstock size of 100 mm.
| Mualliflar | Odilbek AMANOV, Mukhammadyusuf MATMUSAYEV, Mastura ARIPOVA |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-04-13 |
| Jild | 2023 |
| Son | 3 |
| Til | en |
| DOI | 10.70189/1992-9498.1608 |
DOI: 10.70189/1992-9498.1608 · Maqolaning asl sahifasi
The purpose of this study is to obtain an extract of Astragalus turkestanus with a high content of biologically active substances and the lowest content of associated substances. The factors influencing the process of…
In this article, samples of soils contaminated with oil and oil sludge from the Seydi and Turkmenbashi oil refineries were studied. In order to identify the native microflora, as well as hydrocarbon-oxidizing…
The purpose of the study is to develop a new catalytic system for the synthesis of internal acetylene alcohols from the Sonogastric coupling reaction of terminal acetylene alcohols and benzolchloride. For the first time…
In order to establish optimal drying modes for an aqueous extract from the aboveground part of Scutellaria adenostegia, the following parameters were studied: solution concentration; solution feed rate; temperature of…
The aim of this work is to study the influence of the granulometric composition of dolomite and limestone of 0.1–1.0 mm, 1.0–1.6 mm, 1.6–2.5 mm fractions on the rate of glass formation processes in the synthesis of…
The purpose of the work is acceleration of the process of nitrate decomposition of local dolomite raw materials and study its processing into MgOH, MgO, liquid and granular magnesium fertilizers. We studied the effect…
The aim of the study is to determine the strength of the developed glass ionomer cements. As a powder of glass ionomer cements, glasses obtained in the SiO2-Al2O3-CaO-ZnO-P2O5-CaF2 system were used. The synthesized…
The main goal is to recover spent alkanolamine (methyldiethanolamine) used in natural gas purification. The negative changes resulting from the destruction of alkanolamine, which affect its physicochemical properties…
The aim of the study was to develop microwave synthesis of luminescent yttrium oxide powders doped with ytterbium and erbium ions (Y2O3:Yb3+, Er3+) in the process of homogeneous precipitation from a reaction mixture of…
The aim of the present research is to develop compounds and technologies for applying the luminous vitrocrystalline compounds to smooth and ribbed glass substrates in LED lamp structure with a remote photoconverter that…