The aim of the present research is to develop compounds and technologies for applying the luminous vitrocrystalline compounds to smooth and ribbed glass substrates in LED lamp structure with a remote photoconverter that contains oxide low melting glass as the base and nanostructured cerium–doped yttrium–aluminum garnet powder as the luminophore. The luminescent coatings based on nanostructured cerium doped yttrium-aluminum garnet powder and low melting glass of composition BaO-Bi2O3-B2O3-K2O-SiO2 where prepared. YAG:Ce3+ powder was synthesized by the method of thermochemical reaction. Silica glass powder was introduced into the composition as diffuse scattering component, improving the lighting characteristics. Spectral-luminescent characteristics of coatings were studied.
| Mualliflar | Eygeniy N. PODDENEZHNY, Е. Е. Трусова, А. А. Бойко, Ekaterina R. KRAVCOVA, О. В. Давыдова |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-05-03 |
| Jild | 2024 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1550 |
DOI: 10.70189/1992-9498.1550 · Maqolaning asl sahifasi · PDF
The main goal is to recover spent alkanolamine (methyldiethanolamine) used in natural gas purification. The negative changes resulting from the destruction of alkanolamine, which affect its physicochemical properties…
The purpose of the study is extraction of the indene from pyrolysis oil obtained from the pyrolysis of hydrocarbons at the Ustyurt gas processing plant. Indene is isolated by rectification from the composition of…
The purpose of the work is acceleration of the process of nitrate decomposition of local dolomite raw materials and study its processing into MgOH, MgO, liquid and granular magnesium fertilizers. We studied the effect…
The purposes of the study are the synthesis of granular aluminum oxide and magnesium-aluminum spinel using various residues formed during thermochemical regeneration of adsorbents deactivated by chloride compounds, the…
In order to establish optimal drying modes for an aqueous extract from the aboveground part of Scutellaria adenostegia, the following parameters were studied: solution concentration; solution feed rate; temperature of…
Multisorption of heavy metals from aqueous solutions is very important in hydrometallurgy, industrial waste disposal, and water purification. The aim of this study is Monte Carlo simulation of the adsorption process of…
In this article, samples of soils contaminated with oil and oil sludge from the Seydi and Turkmenbashi oil refineries were studied. In order to identify the native microflora, as well as hydrocarbon-oxidizing…
The aim of the study is to increase the resistance of polystyrene concrete obtained from recycled polystyrene to dynamic shock loads. The issues of resistance of polystyrene concrete to compression forces with…
The aim of the work is to improve the process of coarse grinding of clay raw materials in the manufacture of ceramic products. To achieve this goal, a comparison was made of existing machines - disintegrator rollers…
Extensive research is being carried out in the world on the effective use of non-traditional plant raw materials, its production in margarine, mayonnaise and similar oil and fat products. In this aspect, special…