The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of pre-oriented yarns (POY) threads has been carried out. The technological, physicomechanical properties, as well as the structure of the primary and secondary polyethylene terephthalate used in the production of the threads have been studied. The structure and properties of polyethylene terephthalate changed: the properties were worse, the structure were amorphous, the molecular weight decreased. The structure of recycled polyethylene terephthalate changed as a result of technological conversions in the production of POY fibers. This is due to a change in the thermophysical characteristics and structure of secondary polyethylene terephthalate under the influence of heat, moisture, and shear stresses. A comparative analysis of the physicomechanical properties of POY yarns obtained from primary and secondary polyethylene terephthalate has been carried out.
| Mualliflar | Samida ERNZAROVA, Asror JURAEV, М. Г. Алимухамедов, F. A. Magrupov |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2022-02-04 |
| Jild | 2021 |
| Son | 4 |
| Til | en |
| DOI | 10.70189/1992-9498.1442 |
DOI: 10.70189/1992-9498.1442 · Maqolaning asl sahifasi
The aim of the work is to improve the process of natural gas purification from acidic components using a composite absorbent. To study the sorption of acidic components in the gas composition, a chromatographic analysis…
In this article the alcoholysis process conditions of secondary polyethylene terephthalate with the mixture of polyhydric alcohols have been investigated. This study has found that the aggregative state of the products…
The aim of the work was to study the thermal behavior of the polyelectrolyte complexes of Bombyx mori ChS with collagen. As a result of the studies, the thermal properties of polyelectrolyte complexes based on Bombyx…
The influence of the glass and basalt fibers on the thermal properties of polypropylene was studied. It is estimated the effect type of concentration of fillers on the thermal properties of base polypropylene.
The aim of this study is to investigate the adsorption kinetics of Cu(II) and Ni(II) ions from aqueous solutions using an adsorbent obtained by treating rice husk with a solution of monoethanolamine. The experiments…
Creating dietary margarines using biologically valuable substances is the purpose of the work. According to the results of the experiments, it was found that the use of soybean oil, edible vegetable phospholipids and a…
Loss on ignition (LOI) of cement, raw materials and raw mixes in cement industry is specified as the weight loss at 900~1000 oC and 15~30 minutes in the standards of each region (GOST, ISO, ASTM, JIS, KS) in the world…
The purpose of this work is the preparation of keratin-containing protein compounds from poultry processing waste by hydrolysis with hydrochloric acid, including treatment of the protein with 5% H2O2. The process of…
The purpose of this work is the synthesis of Fe3BO6 nanoparticles for use as the main component in the chemical method for obtaining nanostructured Nd-Fe-B alloys. Amorphous Fe3BO6 nanoparticles prepared by chemical…
The results of research on the use and return technogenic microsilica into the process of producing silicon metal and ferrosilicon are presented. The chemical composition and granulometric structure, physical and…