In this article the alcoholysis process conditions of secondary polyethylene terephthalate with the mixture of polyhydric alcohols have been investigated. This study has found that the aggregative state of the products of alcoholysis of secondary polyethylene terephthalate with glycerol is solid, and does not meet the requirements of the technological indicator of polyurethane foam. The structure of the resulting hydroxyl-containing polyether polyols was studied by IR spectroscopy. The influence of the physicochemical properties of alcoholysis products on the molar ratio of SPET with glycerine and the duration of the reaction has been shown. The structure and technological properties of the products obtained have been determined. There have been achieved to obtain adjusting the viscosity and flowing hydroxyl-containing polyether polyols on the basis of polyhydric alcohols through alcoholysis.
| Mualliflar | Khudayberdiev Akhmadali, Sayidov Boysayid, Juraev Asror, Alimukhamedov Muzaffar |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2019-11-11 |
| Jild | 2019 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1094 |
DOI: 10.70189/1992-9498.1094 · Maqolaning asl sahifasi
The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of…
The influence of the glass and basalt fibers on the thermal properties of polypropylene was studied. It is estimated the effect type of concentration of fillers on the thermal properties of base polypropylene.
The aim of the work is to improve the process of natural gas purification from acidic components using a composite absorbent. To study the sorption of acidic components in the gas composition, a chromatographic analysis…
Creating dietary margarines using biologically valuable substances is the purpose of the work. According to the results of the experiments, it was found that the use of soybean oil, edible vegetable phospholipids and a…
The purpose of this work is the preparation of keratin-containing protein compounds from poultry processing waste by hydrolysis with hydrochloric acid, including treatment of the protein with 5% H2O2. The process of…
The aim of the work was to study the thermal behavior of the polyelectrolyte complexes of Bombyx mori ChS with collagen. As a result of the studies, the thermal properties of polyelectrolyte complexes based on Bombyx…
The aim of this study is to investigate the adsorption kinetics of Cu(II) and Ni(II) ions from aqueous solutions using an adsorbent obtained by treating rice husk with a solution of monoethanolamine. The experiments…
The purpose of this work is the synthesis of Fe3BO6 nanoparticles for use as the main component in the chemical method for obtaining nanostructured Nd-Fe-B alloys. Amorphous Fe3BO6 nanoparticles prepared by chemical…
Loss on ignition (LOI) of cement, raw materials and raw mixes in cement industry is specified as the weight loss at 900~1000 oC and 15~30 minutes in the standards of each region (GOST, ISO, ASTM, JIS, KS) in the world…
The effect of hydrothermal treatment on the strength of the wheat grain shell before the first torn process is investigated. It was found that the anatomical parts of wheat grains grown in arid climatic conditions are…