The method of calculating the roughness of gear teeth depending on the parameters of gear meshing of gears at rolling friction with slippage. A model for calculating the equilibrium roughness of the surface in the form of a truncated cone, made on the basis of a spherical roughness model. Methods of determining the technological roughness protrusion; calculation of the depth of implementation of the protrusion of equilibrium roughness in the surface of the counter body; assessment of the pattern of change in the roughness of the gear teeth depending on the meshing module, load in the meshing. A method of evaluating the change in the ratio of the actual and nominal contact area depending on the degree of relative slip between the teeth of the gears, changes in the actual contact area of the gear teeth depending on the meshing module of the gear.
| Mualliflar | А Иргашев, B. A. Irgashev |
|---|---|
| Jurnal | Илм-фан ва инновацион ривожланиш |
| Nashr sanasi | 2021-08-27 |
| Jild | 4 |
| Son | 4 |
| Betlar | 113-123 |
| Til | en |
| DOI | 10.36522/2181-9637-2021-4-11 |
DOI: 10.36522/2181-9637-2021-4-11 · Maqolaning asl sahifasi
Silver nanoparticles stabilized in sodium-carboxymethyl cellulose (Na-CMC) solution with degree of substitution 0,65-0.85 and degree of polymerization 200-600 were synthesized. The structure, physico-chemical…
The subject of the research is to study the role of motivation in the involvement of potential personnel in the research, scientific and pedagogical activities for implementation of innovative development. The purpose…
Knowing a chemical composition of preferred feed plants of the Turkestan termite will enable the development of effective and available agents to be used for its control, that is particularly important during the period…
Studies reveal that during processing of cocoons, natural polymers in the cocoon become sufficiently swollen under water, and depending on the external ambience, climatic temperature, humidity, the sericin contained in…
This study investigated the cognitive sphere in young and middle-aged patients with hypothyroidism. The aim of the study was to determine the dependence of cognitive impairment on the severity of hypothyroidism and the…
Manufacturing processes in the publishing industry have long gone digital. Today, it is natural that scientometric research and methods are almost entirely focused on the processing of data presented on the Internet…
The surface morphology and structural properties of titanium dioxide micro-powders have been investigated by scanning electron microscopy and Raman spectroscopy. The Raman scattering was excited by the green line of a…
The foreign Ento-Dephol showed high result with 30-40% of guza couses opened using 0.200 litres of defoliation for each hectare in view to defoliate cotton artificially. 7.0 litres of defoliation ensured better result…
This article discusses factors of sustainable socio-economic development and its level in the EU countries, taking into account that ensuring sustainable socio-economic development of the world in today’s transition to…
The paper discusses reliability of a multi-level information-measuring system (IMC), which ensures monitoring of technical condition of technological facilities and traction power supply devices and their diagnostics…