This article is devoted to studying the effect of the thickness of the slices and the type of transparent coating material on the efficiency of solar drying of eggplant slices. The experiments were conducted in a solar dryer coated with a functional ceramic-based composite polyethylene film (Composite) and a conventional solar dryer using a regular polyethylene film. The results of drying in the open sun were also compared. For the study, fresh eggplants were cut into 5 mm and 10 mm thick slices and dried in both devices under the same environmental conditions (solar radiation intensity, ambient temperature, relative humidity, wind speed). During the drying process, the weight of the eggplant slices, the temperature inside the drying chamber, and the relative humidity were continuously recorded. The results obtained showed that the drying efficiency depends on the product thickness and the drying method. For 5 mm thick eggplant, the Composite device was found to be the most efficient method, achieving the lowest final residual mass. For 10 mm thick eggplant slices, the open sun method achieved the highest efficiency
| Mualliflar | Muxtarov, Dilmurod |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2025-06-30 |
| Jild | 10 |
| Son | 2 |
| Betlar | 230-238 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i2.770 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v10i2.770 · Maqolaning asl sahifasi
| APA | Muxtarov, Dilmurod (2025). 620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer. Наманган муҳандисликтехнология институти илмийтехника журнали, 10(2), 230-238. https://doi.org/10.61151/stjniet.v10i2.770 |
|---|---|
| GOST (OAK) | Muxtarov, Dilmurod 620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2025. – T. 10, № 2. – P. 230-238. – DOI: 10.61151/stjniet.v10i2.770. |
| MLA | Muxtarov, Dilmurod. “620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(2), 230-238, 2025. https://doi.org/10.61151/stjniet.v10i2.770 |
| Chicago | Muxtarov, Dilmurod. “620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(2), 230-238 (2025). https://doi.org/10.61151/stjniet.v10i2.770 |
| Harvard | Muxtarov, Dilmurod (2025) ‘620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer’, Наманган муҳандисликтехнология институти илмийтехника журнали, 10(2), 230-238. https://doi.org/10.61151/stjniet.v10i2.770 |
| BibTeX | @article{muxtarovdilmurod2025,
title = {620.92 INVESTIGATION OF DRYING EFFICIENCY IN A SOLAR INSTALLATION WITH COMPOSITE POLYETHYLENE FILM DEPENDING ON THE PRODUCT THICKNESS: Solar dryer},
author = {Muxtarov, Dilmurod},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2025},
volume = {10},
number = {2},
pages = {230-238},
doi = {10.61151/stjniet.v10i2.770},
url = {https://doi.org/10.61151/stjniet.v10i2.770}
} |
Boshqa maqola uchun iqtibos tayyorlash
Purpose of the work. There are various methods for preventing scale formation on heating surfaces and cleaning surfaces from scale: chemical, mechanical, and methods related to the management of hydrodynamic modes…
It was found that in the first 4 hours of the solar installation, the residual mass dries up to 67%, 38%, 17%, and 13%. In direct sunlight, it has been determined to dry up to 75%, 43%, 18%, and 12%. These results…
Digital modeling of heat transfer processes in oil power transformers is a very important tool for determining their thermal state and assessing their reliability. Based on the results obtained during the study, the…
This study investigates methods for developing the lexical competence of future English teachers, a critical component of language proficiency essential for effective teaching. Through a mixed-method approach involving…
This article focuses on developing communicative competence among seventh and eighth-grade students in Uzbekistan’s secondary schools, proposing a specialized module aimed at enhancing language skills. Given the rising…
This article investigates the aminolysis of secondary polycarbonate (IPC) (commonly found in car headlights, rims, polymer roofs, etc.) and monoethanolamine , (MEA) (GOST 10136-77 , produced in the Russian Federation)…
Ushbu maqolada maktabgacha ta’lim muassasalarini davlat-xususiy sheriklik (DXSh) asosida moliyalashtirish jarayonlari tahlil qilinadi va ushbu muassasalarda hozirgi samaradorligi o‘rganiladi. Maqola davlat maktabgacha…
This work analyzes the denominator of the transfer function of second-order elements widely used in modern automatic control systems - the characteristic equation. The transfer function is calculated and derived, and it…
Maqolada yog 'kuch transformatorlarining magnit yadrolarida uzoq muddatli ishlash natijasida energiya yo'qotishlari tahlil qilinadi. Tadqiqotda yuksiz rejimdagi magnit yo'qotishlar - histerezis va girdab oqimlari…
This research study studies the processes of quality control and analysis of clothing products. The work provides information on the quality indicators of clothing products, their assessment criteria, control methods…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2025-yil arxivi
It was found that in the first 4 hours of the solar installation, the residual mass dries up to 67%, 38%, 17%, and 13%. In direct sunlight, it has been determined to dry up to 75%, 43%, 18%, and 12%. These results…
Objective. For the development of mobile structures of solar drying devices, it is proposed to use a composite film developed on the basis of functional ceramics as a transparent wall. Determination of comparative…