The forces acting on the bobbin due to moisture, density, and hardness of the tangle formed between rows of cotton were studied. Roll on in the longitudinal - vertical plane, in addition to the forward motion, the aggregate of the blade performs a forced oscillating motion in the vertical direction. Forced vibration motion of the roller in the vertical direction was studied. It was found that the force was linearly dependent on the amount and speed of the deformation of the coil under the influence of rolling. The sum of the forces arising from the variation of the physico-mechanical properties of the concrete was found.[1] It can be seen from the analysis that, for the given working conditions, the quality of the smoothing of the roller by the roller was achieved due to its total mass, that is, the parallelogram mechanism and the joint mass, the uniformity of the pressure spring, and the correct choice of the angle of deviation from the horizon during the operation of the parallelogram mechanism's longitudinal pullers.[2]
| Mualliflar | Egamov, Nodirbek |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-12-27 |
| Jild | 9 |
| Son | 4 |
| Betlar | 10-14 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i4.658 |
DOI: 10.61151/stjniet.v9i4.658 · Maqolaning asl sahifasi
friction, moisture, density, rolling, softening of friction, rolling stock, oscillatory motion, differential equation, parallelogram, hinge, deformation, static, coefficient
The purpose of this article is to analyse the problems affecting the increase in fuel consumption of mine dump trucks, as well as the efficiency of BelAZ dump trucks. Various methods of determining fuel consumption…
This article explores the multifaceted innovations in autonomous vehicles (AVs), from the technological breakthroughs to societal impacts. It begins by highlighting how AVs have the potential to reshape transportation…
This article explores the prospects for developing a hydro turbine pump operation and electricity generation system using water flow energy. The system under investigation utilizes a hydro turbine that converts the…
According to the conducted research, the main working parts of the device when extracting fly beads from waste in operating regenerator machines are the sawn-off drum knives and the grate grid, and their location…
Abstract: this article thoroughly examines the advantages and disadvantages of existing distillation equipment used in the process of distilling vegetable oil miscella. Each stage of the distillation process, including…
Currently, the assessment of aesthetic appeal is conducted through a visual analysis of the product, which includes a professional evaluation of its appearance in terms of harmony, proportionality, and originality…
This investigation presents the findings on the adsorption and kinetics of methylene blue using a modified laponite-based adsorbent. The research demonstrated that methylene blue could be effectively adsorbed from…
The purpose of the research was to theoretically substantiate the principles of oxidation and directions in the development of ways to prevent the appearance of derivatives of oxidation of vegetable oils based on…
The oil and fat industry is one of the leading sectors of Uzbekistan's food industry. Existing systems in the oil and fat production sector are designed to process large quantities of primarily homogeneous raw…
The article presents dressing sauces prepared on the basis of sauce-paste semi-finished products that can be used in the preparation of canned fish, and their physical properties, including the stability of the system…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar