The main results of the study on the development of an effective technology for processing pyrolysis distillate into motor fuel, based on the catalytic process of hydrotreating raw materials and hydrogenation of intermediate technological products under relatively mild conditions, are presented. The main stages of the new technology are heating of raw materials and hydrogenated product in furnaces, two-stage catalytic processing of distillate and hydrogenated product, heating of raw materials and cooling of reaction products and separation of the gas product mixture with the release of hydrogen-containing gas.
| Mualliflar | Xudayberdiyev, Abdukarim |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-12-27 |
| Jild | 9 |
| Son | 4 |
| Betlar | 304-310 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i4.548 |
DOI: 10.61151/stjniet.v9i4.548 · Maqolaning asl sahifasi
gas processing, pyrolysis distillate, hydrotreating, hydrogenation, heating, cooling, heat exchanger, reactor, catalyst, process flow diagramprocess flow diagram
Abstract: This literature review examines the implementation of Industry 4.0 in China, focusing on its historical development, strategic national policies, key technological advancements, and socio-economic impacts…
Abstract: This article examines the problems and challenges of the implementation of Industry 4.0 in Germany, focusing on the technological, economic, and social aspects of this industrial transformation. Special…
This article presents information on how the enrichment of low-quality coal, amounting to 2.0 million tons with a high ash content, can lead to more efficient utilization. The aim of the study is to reduce the ash…
This article provides information about delayed objects, the causes of their delay and methods of reducing their delay time.
The article presents an analysis of the scientific work carried out to improve the technology of cleaning cotton from large impurities, and also describes the results of the experimental work of the proposed…
Abstract. As a unique approach to the research of automatic control systems, the algorithm for creating structural schemes, which is one of the forms of their mathematical models, is described. An example of the use of…
The article provides a diagram and principles of operation of the crank mechanism with composite cams. The results of the kinematic analysis of the mechanism with compound cams are presented, taking into account the…
In this article investigated the mechanical properties of composite yarn which is made from a mixture of synthetic and cotton yarn. The all test results showed mechanical properties of composite yarn which is including…
This study focuses on determining the direct resistance coefficient of cotton fibers within a conical confusor tube, which is essential for optimizing rotor spinning processes. By employing mathematical modeling and…
In this article, the extraction of oil from peanut kernels by pressing method, the production of reduced cycle refining technology in the case of choosing the necessary refining methods, and the selected oil of Rakhbar…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar