The article presents the results of experimental studies of a fiber-optic humidity sensor, the principle of operation of which is based on the method of intracavity laser absorption. A method of intracavity laser absorption is described, which makes it possible to dramatically increase the sensitivity of the fiber humidity sensor by switching to it. A schematic diagram of a fiber optical humidity sensor using a differential detection scheme and a design of an active ring laser fiber consisting of a diode pump laser, a fiber pump beam splitter, two directional couplers, a measuring ring laser, a ring comparison laser, two pump radiation filters and germanium photodetectors are developed. Graphical results of experimental studies of a fiber-optic sensor using a differential registration scheme are demonstrated. Measurements are shown in the range of 1800-1940 nm with a center of ~ 1872 nm, where the absorption of water vapor located in the cuvette is recorded, and from 1940 to 2090 nm - carbon dioxide located in the monochromator and having three absorption bands in this spectral region, according to which the frequency scale of the spectrophotometric hygrometer is calibrated. Comparison of the experimental data with the calculated values showed their satisfactory agreement.
| Mualliflar | Abdulaziz Nazarov, Mirkomil Khasanov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2020-05-10 |
| Jild | 2021 |
| Son | 1 |
| Betlar | 40-47 |
| Til | en |
| DOI | 10.51346/tstu-02.21.1-77-0006 |
DOI: 10.51346/tstu-02.21.1-77-0006 · Maqolaning asl sahifasi
In communication and communication devices, power equipment, relay protection and automation terminals, in the electric power industry of "smart" cities and homes, in industry, in railway transport, microprocessor-based…
It has been revealed that a significant part of industrial control systems designed for technological facilities with more than one input and one output and the most widespread are objects with two inputs and two…
This article presents the main stages of the development of an automated system of processes for determining and ensuring functional and parametric compatibility (FPC) of components of production and technological…
The article is devoted to improving the accuracy of the system for measuring and controlling the level of liquid materials in horizontal cylindrical tanks. The task of ensuring continuous accurate control of the level…
The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered. In addition, it deals with the…
Waste water is generated in almost all industrial enterprises and is contaminated with various organic and inorganic impurities and some heavy metals to varying degrees. The aim of this study is to study the effect of…
The article studies the process of obtaining carbonate-ammonium nitrate (CAN) based on the mixing of melt ammonium nitrate (NH4NO3) with chalk (СаСО3) and ammonium sulfate (NH4)2SO4). For the granulation of…
In this research, we developed appropriate algorithms for the formation of the optimal structural composition of production - technological modules (PTM) based on the automation of the processes of determining and…
The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The…
Тошкент давлат техника университети хабарлари — barcha maqolalar