In order to improve the economic performance of the company, the establishment of rational water use schemes and the reduction of the use of fresh water obtained from water supply systems or natural bodies of water can become an important factor. Water-cooling circulating systems, where cooling towers are used as cooling facilities, are the basis of rational water use systems. In water recycling systems that need stable water cooling at high specific hydraulic and thermal loads, cooling towers are used. By spraying water with nozzles or irrigation devices, the surface of water needed to cool it by contact with air is formed. A cooling tower is a heat exchange device for removing heat from various production processes to the environment by evaporating part of the water passing through it. The share of evaporated water usually does not exceed 1.5 %. Most of the cooling towers used were built 30 - 50 years ago. Almost all of these installations are morally and physically outdated. To consider the main criteria that should be guided with the choice of method for reconstruction of cooling towers to increase the efficiency and effectiveness of their operation.
| Mualliflar | D Muhiddinov, Sh Sanayev, B Boliyev |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2020-09-30 |
| Jild | 2020 |
| Son | 3 |
| Betlar | 180-187 |
| Til | en |
| DOI | 10.51346/tstu-01.20.3-77-0070 |
DOI: 10.51346/tstu-01.20.3-77-0070 · Maqolaning asl sahifasi
The pulse-frequency control systems are widely used in radar, space industry, for control of technological processes and robots and many other areas. Today, there are various approximate and accurate methods for the…
Recycling of techno genic waste accumulated in recent years in Uzbekistan is currently a pressing problem. In this regard, this paper examines the issue of studying the process of enrichment of man-made waste in a…
It provides information on the method of system thinking, where the analysis of the crusher for grinding solid materials shows four hierarchical structure of the object - the jaw crusher. For a particle - a piece of…
The article discusses the modeling of a fuzzy-logical system of regulation of the process of drying of raw cotton. The tasks of overcoming uncertainties arising in the process of operation of technological units at the…
The article considers the influencing technological factors of mining operations on the state of the quarry sides. In technological processes, the stability of the sides of rock and semi-rock rocks and the value of the…
Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility…
The article presents the results of a study to reduce greenhouse gases through the introduction of green technologies. Different countries are making rather tough decisions to reduce greenhouse gas emissions. The basics…
The article discusses the results of studying the material composition and the development of technology for processing gold-bearing sulfide ore samples. The material composition of the ore samples was studied by…
The article discusses the necessity to form internal blades in deep steep falling deposits. The experience of formation and the scheme of blading of internal blades in open-cast mines with different mining and…
The article presents the results of solving the problem of attenuation of an optical signal in fiber-optic communication lines. Widely used modern technical solutions of intermediate amplification-regenerative nodes of…
Тошкент давлат техника университети хабарлари — barcha maqolalar