Electricity consumption regulation is the primary technical basis for energy consumption planning. Electricity consumption is regulated in the form of specific electricity consumption per unit of production or per unit of work performed. Specific energy consumption rate is understood as the consumption of electricity necessary and sufficient to produce a unit of production or to perform a unit of work in the planned conditions of production and operation. Electricity saving takes place if its actual specific consumption is comparable with progressive norms developed on the basis of introduction of new equipment and technology into production, rational operation of technological equipment and electrical installations. One of the main directions of improvement of rationing is the choice of rationing structure taking into account the objective assessment of actual energy resources saving. The article shows the rationing of electricity consumption in the production of finished products at the enterprises of ferrous metallurgy, in particular, at the electric steelmaking industry. The results of the analysis of the state of electricity consumption rationing in the ferrous metallurgy industry are given. The developed multilevel structure of electricity consumption rationing based on the results of the study, which gives the prospects of determining the possibility of energy saving at the object under consideration, is described.
| Mualliflar | Fozildjon Khoshimov, I U Rakhmonov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2018-11-06 |
| Jild | 2018 |
| Son | 1 |
| Til | en |
| DOI | 10.51346/tstu-01.18.1.-77-0005 |
DOI: 10.51346/tstu-01.18.1.-77-0005 · Maqolaning asl sahifasi
Today, production management using integrated information and analytical systems and their integration with the elements of Industry 4.0 is considered one of the most pressing problems in all areas of production. The…
The task of determining specific electricity consumption is complex, as it is necessary to take into account a large number of factors affecting the energy indicators that determine the level of these indicators. At the…
The article discusses the issues of processing slag of copper production using devices that model ideal mixing. It has been shown that the use of this type of apparatus increases the efficiency of physical and chemical…
In article questions of a conclusion of the coefficients of the equations of a rail four-polar of a jointless rail circuit are considered, taking into account uncertainty of borders where the travelling receiver which…
Chemical and mineralogical compositions of mineral deposits and acidic precipitations have been studied, and synergistically effective compositions of inhibitors of salt deposits have been selected based on -PO3H2 and…
The reactivity of cotton pulp during chemical processing is significantly lower compared to celluloses obtained from other cellulose-containing plants. Increasing the reactivity of cotton cellulose improves the quality…
In the article based on the results of the analysis of the existing opto-thyristor resistive circuits, a new scheme of the optoelectronic contactless voltage relay has been developed and its application in the power…
This article presents studies of fire resistance in the treatment of expanded vermiculite, which depends on the size of the dispersed particles and the orientation of the granules, their moisture and temperature. It has…
The paper Presents a disk tribometer installation and allows to determine the antifriction properties of machine-building composite antistatic-heat-conducting polymer materials working in interaction with the fibrous…
Тошкент давлат техника университети хабарлари — barcha maqolalar