The task of determining specific electricity consumption is complex, as it is necessary to take into account a large number of factors affecting the energy indicators that determine the level of these indicators. At the same time, the type and technical condition of the main and auxiliary process equipment in the process of melting, the nomenclature of metal, the volume of consumed components of the process and secondary energy carriers (compressed air, nitrogen, oxygen and other auxiliary components), etc. are taken into account. The error in taking these factors into account may lead to deviations from the actual values of the predicted power consumption, as well as energy indicators. The energy intensity of products and the level of energy consumption also depends on changes in the structure of energy consumption, the latter depending on the need for such process components as compressed air, oxygen, nitrogen, etc. The article considers the results of the analysis of energy indicators of enterprises of ferrous metallurgy, in particular, electrosmelting shop by types of output products on the basis of decomposition scheme. It is shown that the set task is solved by means of construction of dependences of normative energy characteristics on the volume of output products, and also the final decomposition tree is formed - the tree of tasks designed to achieve solutions of energy problems, including the main one - to obtain the value of specific energy consumption. In addition, the article presents the method of determining the share of participation of auxiliary components of the technological process for example of compressed air, nitrogen and oxygen. At calculations the account of the above-stated components gives the chance to define more precisely specific expense of the electric power.
| Mualliflar | I U Rakhmonov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashriyot | Тошкент давлат техника университети |
| ISSN | 2181-0400, 2181-1180 |
| Nashr sanasi | 2018-06-11 |
| Jild | 2018 |
| Son | 1 |
| Til | Ingliz |
| DOI | 10.51346/tstu-01.18.2.-77-0006 |
| Indeksga qo‘shilgan | 2026-09-02 |
DOI: 10.51346/tstu-01.18.2.-77-0006 · Maqolaning asl sahifasi
| APA | I U Rakhmonov (2018). ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION. Тошкент давлат техника университети хабарлари, 2018(1). https://doi.org/10.51346/tstu-01.18.2.-77-0006 |
|---|---|
| GOST (OAK) | I U Rakhmonov ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION // Тошкент давлат техника университети хабарлари. – 2018. – T. 2018, № 1. – DOI: 10.51346/tstu-01.18.2.-77-0006. |
| MLA | I U Rakhmonov. “ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION.” Тошкент давлат техника университети хабарлари, 2018(1), 2018. https://doi.org/10.51346/tstu-01.18.2.-77-0006 |
| Chicago | I U Rakhmonov. “ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION.” Тошкент давлат техника университети хабарлари, 2018(1) (2018). https://doi.org/10.51346/tstu-01.18.2.-77-0006 |
| Harvard | I U Rakhmonov (2018) ‘ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION’, Тошкент давлат техника университети хабарлари, 2018(1). https://doi.org/10.51346/tstu-01.18.2.-77-0006 |
| BibTeX | @article{iurakhmonov2018,
title = {ANALYSIS OF ENERGY PERFORMANCE OF FERROUS METALLURGY ENTERPRISES BASED ON THE SCHEME OF DECOMPOSITION},
author = {I U Rakhmonov},
journal = {Тошкент давлат техника университети хабарлари},
year = {2018},
volume = {2018},
number = {1},
doi = {10.51346/tstu-01.18.2.-77-0006},
url = {https://doi.org/10.51346/tstu-01.18.2.-77-0006}
} |
Boshqa maqola uchun iqtibos tayyorlash
The article deals with the formation of stable algorithms for the system synthesis for the stabilizing uncertain dynamic objects based on the method of local optimization in the presence of approximate mathematical…
The paper Presents a disk tribometer installation and allows to determine the antifriction properties of machine-building composite antistatic-heat-conducting polymer materials working in interaction with the fibrous…
In the article based on the results of the analysis of the existing opto-thyristor resistive circuits, a new scheme of the optoelectronic contactless voltage relay has been developed and its application in the power…
In article questions of a conclusion of the coefficients of the equations of a rail four-polar of a jointless rail circuit are considered, taking into account uncertainty of borders where the travelling receiver which…
Electricity consumption regulation is the primary technical basis for energy consumption planning. Electricity consumption is regulated in the form of specific electricity consumption per unit of production or per unit…
Today, production management using integrated information and analytical systems and their integration with the elements of Industry 4.0 is considered one of the most pressing problems in all areas of production. The…
The article discusses the issues of processing slag of copper production using devices that model ideal mixing. It has been shown that the use of this type of apparatus increases the efficiency of physical and chemical…
Chemical and mineralogical compositions of mineral deposits and acidic precipitations have been studied, and synergistically effective compositions of inhibitors of salt deposits have been selected based on -PO3H2 and…
The reactivity of cotton pulp during chemical processing is significantly lower compared to celluloses obtained from other cellulose-containing plants. Increasing the reactivity of cotton cellulose improves the quality…
Тошкент давлат техника университети хабарлари — barcha maqolalar · 2018-yil arxivi
A review of modern ideas about the normal and pathological anatomy and physiology of the extrahepatic biliary tract and the great papilla of the duodenum of mammals is given. Emphasis is placed on the clinical…
Complications of cicatricial deformation caused by combined damage to soft tissues of the maxillofacial region. It turned out that using biopsy and surgically obtained materials from tissues of cicatricial deformation…
Ultraphonophoresis is one of its effective physiotherapeutic methods, widely used in the past. Allatation, extract of onion and heparin is considered very effective substance for the healing process of scars of…
this article describes methods of using alternative energy and measures to improve them.
CO2 fractional laser is considered one of the most effective methods for the treatment of the different scaring complications of the skin, including maxillofacial region. Application of anti-scaring gel silicon with…
This article describes that, infrared thermometry values were compared on days 1, 3, 5, and 8 after the primary surgical treatment of the wounds. Local temperature on the wound surface was measured at the main and…