The results of research on the formation of nonfritted glass-ceramic coatings for sanitary ceramic products are presented. The synthesis was carried out in a multicomponent raw material mixture including pegmatite, chalk, quartz sand with a constant content of zirconium silicate, talc, wollastonite, zinc whitewash, refractory clay and kaolin. Glazes were obtained by single firing at a temperature of 1200±5 °C for a duration of 20 hours. Samples of coatings were obtained, the processes of glaze formation were studied, the fusibility of glazes was assessed, and their physico-chemical properties were studied in relation to the features of the formation of the structure and phase composition.
| Mualliflar | I. A. Levitskii, M. V. Dyadenko, V. G. Luhin |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2026-06-23 |
| Jild | 2026 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1724 |
DOI: 10.70189/1992-9498.1724 · Maqolaning asl sahifasi · PDF
The aim of this work is to synthesize nanostructured luminescent powders of yttrium oxide doped with terbium ions. Y2О3:Tb3+ powders were obtained by thermochemical synthesis (combustion). The sources for the synthesis…
The research results of the development of glass compositions for a light-guiding core, reflective and protective coats of optical fiber using a stack method are presented. The optimal ratio of glass-forming oxides and…
Phosphogypsum, a large-scale industrial by-product generated during phosphoric acid production, poses significant environmental challenges due to its accumulation and potential ecological impact. This study investigates…
This article investigates the effect of ellagic acid isolated from Maclura pomifera fruit on the staling dynamics during the storage of bread products. The study aimed to determine the effectiveness of ellagic acid's…
The aim of this study was to develop and experimentally validate a selective method for producing high-purity cobalt oxide from WC–Co hard alloy waste using oxidative fusion in a sodium nitrate (NaNO3) melt, followed by…
The aim of this work is to analyze the photocatalytic degradation of a model methylene blue solution using titanium dioxide composites with zinc phthalocyanine as the sensitizing photocatalyst under sunlight. The…
This study represents the synthesis technology of MXene catalyst for hydrogen evolution reaction (HER) and investigates the temperature-dependent electrocatalytic activity of MXene-based catalysts in alkaline media…
The aim of this study was to synthesize and systematically investigate the coordination compounds of several 3d metals with 2-(2-pyridyl)benzimidazole (2-PBI) using infrared (IR) spectroscopy. Complexes of copper(II)…
The aim of this work was to study the process of alcoholysis of recycled polyethylene terephthalate with diethylene glycol, as well as the structure and physicochemical properties of the final product. IR and PMR…
In this study, the kinetic characteristics of the nucleophilic substitution (SN2) reaction between piperidine and chloroacetic acid were investigated in real time at 50, 60, and 70 °C using ATR-FTIR spectroscopy. The…