The aim of the study is to study the chemical composition of the grain of rye "Vakhsh-116" grown in the Andijan region of the country, the analysis of its technological properties, the comparison of the chemical composition and technological properties of the grain of local wheat "Davr" and rye grown in Russia, the features of milling flour for the production of bread. It has been established that the geometric dimensions of the grain affect the stacking density during the formation of grain layers, i.e. on the formation of layers of grain of a certain thickness on a sieve when cleaning or sorting grain. The indicators of the geometric characteristics of the grain play a key role in the processes of heat and moisture transfer of grain, especially during the hydrothermal treatment of the latter. It was determined that in the largest grains the core is larger, the shells are thinner and smaller. In small grains, on the contrary, the kernels are smaller, the shells are thicker and larger, therefore the grain composition of small grains is characterized by an abundance of fiber and ash. The chemical composition of rye grain of the Vakhsh-116 variety grown in the republic was studied, the technological properties of grain, the chemical composition and technological properties of local varieties of wheat and rye of the Davr variety, as well as those grown in foreign countries, were analyzed. Uzbekistan.
| Mualliflar | Muhammad-Zaxiriddin ZAYNOBIDDINOV, Kuchkor Dodaev, Suvonkul RAVSHANOV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-03-28 |
| Jild | 2022 |
| Son | 3 |
| Til | en |
| DOI | 10.70189/1992-9498.1561 |
DOI: 10.70189/1992-9498.1561 · Maqolaning asl sahifasi
The aim of the work is to conduct gas condensate studies of the Maimanak field, to obtain complete physical and chemical characteristics of gas condensate. A set of laboratory works was carried out to study gas…
The aim of the research is study the mechanism of calcium silicate hydrates (CSH) interaction with an aqueous solution of copper chloride (CuCl2) to further develop optimal parameters of the technological process of…
The purpose of our work is to isolate and study the physicochemical properties of pectin substances (an acidic polysaccharide) isolated from the pursley medicinal plant (lat. Portúlaca olerácea) growing on the lower…
The aim of this study was to develop and validate the quantitative determination of titration and HPLC methods and compare them in terms of reproducibility. The development of new approaches to quality control requires…
The main goal of this study is the mathematical modeling of the optimal conditions for the synthesis of 4´,4´´-di-(1-methyl-1-hydroxy-2-phenylethynyl)-dibenzo-18-crown-6 by the least squares method. In the STAT program…
The aim of the research is to establish the optimal parameters of the technological process for the production of feed, crystalline monocalcium phosphate based on defluorinated and desulphated extraction phosphoric acid…
The aim of the re is to enrich the washed burnt phosphor concentrate of Central Kyzylkums with extraction phosphoric acid. Optimal technological parameters of enrichment have been established, at which there is no loss…
The aim of the study was to optimize the process of extraction of aflatoxins secreted by fungi of the genus Aspergillus from almonds, as well as to analyze the content of aflatoxins using high performance liquid…
The sulfurization method has been used to decrease the band gap of the BiVO4 structure, reduce the recombination of electrons and holes, and increase the photoelectrochemical performance of this material. It has been…
The aim of this study is to synthesize the corresponding aromatic acetylenic alcohols by alkylation with phenylacetylene in a complex catalytic system based on Zn(OTf)2 and TBAF·3H2O for the first time with benzaldehyde…