Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total, losses from corrosion are 4-6% of national income in many countries. This indicates the need for research and the importance of scientific and technical work in this area. This can be achieved by developing a technology for producing anticorrosive compounds and applying them as protective coatings. The anticorrosive protection of a coating synthesized on the basis of local raw materials - epoxyurethane with an additive - was determined by the method of weight loss of metal plates in various aggressive media, impact strength, frost, heat resistance, adhesion and the degree of protection against corrosion. It was found that the synthesized anticorrosive coating possesses high chemical resistance in various environments, the loss of metal mass is insignificant. Full-scale tests were carried out on a MAN CLA 26.280 after its preliminary preparation. The results showed high strength - 75 sm, adhesion - 1 point, and the degree of corrosion resistance was 98.9%. The observation carried out in the operating mode of the car with a run of more than 8 thousand km, and no changes in coating were observed
| Mualliflar | BARKHANADJYAN, Aida, KHAKIMOV, Ravshan, IBRAGIMOV, Botir, VAFAYEV, Oybek, AYRAPETOV, Dmitriy |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2021-09-09 |
| Betlar | 46-49 |
| Til | en |
| DOI | 10.51348/amiw3430 |
DOI: 10.51348/amiw3430 · Maqolaning asl sahifasi
The purpose of the study is to change the properties of water in order to achieve the optimum impact on wheat grain in preparation for variety milling. The results of influence on the properties of drinking water by…
With the aim of determination of electronic and geometrical structures of mixed-ligand complexes, theoretical modeling of the structures of coordination compounds of transition metals with dialkyldithiophosphate…
The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the…
Previously shown that coatings formed on titanium by plasma electrolytic oxidation (PEO) in an electrolyte with zirconium sulfate Zr(SO4)2 consisted of ZrO2 and TiO2 oxides, their surface layer is enriched with…
The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective…
The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the…
The aim of the work is to expand the capabilities of solar technologies and areas of practical use of superconductors. The effect of white light on the interaction of superconducting ceramics with a magnet at room…
The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of…
Aimed studies on the synthesis of metal complexonates have carried out. The reaction of obtaining zincate zincate oxyethylene diphosphonic acid OEDP has studied. On the basis of synthesized zincate-OEDP, compositions of…
The purpose of the study is to increase the efficiency of using used engine oils as a dispersion medium for plastic lubricants. It has been established that the removal of resins, carbenes, carbides and asphaltenes from…