Previously shown that coatings formed on titanium by plasma electrolytic oxidation (PEO) in an electrolyte with zirconium sulfate Zr(SO4)2 consisted of ZrO2 and TiO2 oxides, their surface layer is enriched with zirconium, they have good protective properties in chlorine-containing media. The resulting layers have a fairly regular distribution of relatively small pores, with a diameter of about 1 μm or less, on the surface. The composition and structure of PEO layers depend on both the composition of the electrolyte and the modes of formation. It is of scientific and practical interest to elucidate the effect of the conditions for the formation of coatings with ZrO2 on titanium and its alloys on their anticorrosive properties in chlorine-containing media. Samples for research were formed under anodic (unipolar) conditions at the same current density and different formation times. The samples were formed in modes with current density 0.08 A/cm2 and processing time (minutes) − 8.5; 9.5; 10; 11; 12; 13; 14; 15; 20; 30; 40; 60. The duration of treatment was chosen as to maximally repeat the anticorrosive characteristics obtained in the previous case. The work uses modern research methods, including electron microscopy, presents the results of further study of ZrO2 + TiO2 / Ti systems formed in an electrolyte with zirconium sulfate Zr(SO4)2. It has been established that coatings are formed on titanium and its alloys in an electrolyte with zirconium sulfate under galvanostatic conditions of the PEO process at i = 0.08 A / cm2 during a processing time of 11-15 min. There is a correlation between the stages of galvanostatic formation of coatings and their anticorrosive properties.
| Mualliflar | RAKHIMOV, Uchkun, ABDURAIMOVA, Nasiba, MANSUROV, Yulbarskhon |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2021-12-20 |
| Betlar | 3-8 |
| Til | en |
| DOI | 10.51348/cce202141 |
DOI: 10.51348/cce202141 · Maqolaning asl sahifasi
The purpose of the study is to change the properties of water in order to achieve the optimum impact on wheat grain in preparation for variety milling. The results of influence on the properties of drinking water by…
The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the…
Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total…
The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of…
The purpose of the study is to increase the efficiency of using used engine oils as a dispersion medium for plastic lubricants. It has been established that the removal of resins, carbenes, carbides and asphaltenes from…
With the aim of determination of electronic and geometrical structures of mixed-ligand complexes, theoretical modeling of the structures of coordination compounds of transition metals with dialkyldithiophosphate…
The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the…
Indoor air quality has a significant impact on human health as people spend more time indoors. As a common indoor air pollutant, acetaldehyde is considered toxic when exposed to it for a prolonged period. The aim of…
The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective…
The aim of this work is to develop the technology of obtaining high-performance paintwork materials for road markings on the basis of local raw materials. The existing paint and varnish materials (paintwork materials)…