The paper studies the influence that Al2O3, B2O3, SiO2 and CaO containing modifying components introduced in different combinations have on the technological and mechanical properties of basalt glass concerning their use in the production of continuous fibre. It is shown that introduction of boron-containing components into compositions with basalt accelerates achievement of structural homogeneity of the melt and reduces crystallization capacity of the glass. The viscosity and the upper crystallization temperature numbers that determine the technological parameters of fibre formation are determined. The elastic and strength properties of basalt glass were studied under static and cyclic loads. It is established that introduction of modifying aluminium-containing components ensures a 15–30% increase in the strength parameters. The optimal combination of technological and mechanical properties of basalt glass is achieved due to the use of compound modifiers with aluminium- and boron-containing components.
| Mualliflar | Yury PAVLIUKEVICH, L. F. Papko, Е. Е. Трусова, А А Уваров |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-03-17 |
| Jild | 2022 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1513 |
DOI: 10.70189/1992-9498.1513 · Maqolaning asl sahifasi · PDF
The purpose of this study is to develop a technology for incorporating essential oils (EOs) into yogurt. Various essential oils such as cinnamon oil, garlic oil, caraway oil and clove oil in yogurt are used as…
In this study, we aimed to isolate genomic DNA (gDNA) from a yeast cell using various methods and choose the cheapest, most convenient, and fastest method among them. For this purpose, based on a thorough review of the…
The purpose of the study was to study the physicochemical and microbiological characteristics of groundwater and drinking water samples used in the preparation of wheat grain for grinding, as well as to study their…
The aim of the work is to study the chemical composition of essential oil samples of four endemic species of wormwood growing in the Central Kopetdag, to determine the main components. Using the method of steam…
The purpose of this work is determination of crystal structure and Hirschfeld surface void analysis for many intermolecular interactions in the crystal structure of…
Purpose of scientific research - the need for the synthesis and study of physico-chemical properties of polymethylennaphthalene sulfocyanate on the basis of naphthalene fraction obtained on the basis of fractional…
The aim of the research is to develop lead-free optical glass with increased refractive index based on BaO – B2O3 – SiO2 system. A study of technological and physical-chemical properties of glass was conducted. It has…
The purpose of the study is to change the properties of water in order to achieve the optimum impact on wheat grain in preparation for variety milling. The results of influence on the properties of drinking water by…
The purpose of this study is the synthesis and study of a chelating sorbent for the extraction of ions of non-ferrous and noble metals. To achieve this goal, a sulfur-containing chelating sorbent based on carbamide…
The aim of the work is dedicated isolation of anthocyanins by ethanol from herbal plant of Occimum basilicum L. Lamiaceae basis. The were studied influencing of temperature, concentration of ethanol to isolation of…