The article presents a method of parametric compensation of inductive load drift in measurement and control systems of power converter output voltage. Variations in inductance over time cause phase shifts and voltage instability, reducing measurement accuracy. An automatic compensation algorithm is developed, based on dynamic adjustment of the compensating capacitor capacitance according to the current load parameters. Analytical relationships between inductance variation, capacitance, and output voltage are derived, and vector diagrams confirm phase balance under correct compensation conditions. Experimental results show a 20–25% improvement in measurement accuracy and output voltage stabilization within ±2% for inductance changes up to ±15%. The proposed method can be implemented in intelligent diagnostic and control systems of industrial drives for metalworking machines.
| Mualliflar | Сайфулин, Рамиль Рашидович, Sayfulin, Ramil Rashidovich, Sayfulin, Ramil Rashidovich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2026-02-14 |
| Jild | 4 |
| Son | 1 |
| Betlar | 51-56 |
| Til | Rus |
| DOI | 10.70769/3030-3214.srt.4.1.2026.13 |
DOI: 10.70769/3030-3214.srt.4.1.2026.13 · Maqolaning asl sahifasi
параметрическая компенсация, дрейф индуктивности, силовой преобразователь, выходное напряжение, интеллектуальная диагностика, parametric compensation, inductance drift, power converter, phase balance, output voltage, intelligent diagnostics, electric drive, measurement and control, parametrik kompensatsiya, induktivlik drifti, quvvat o‘zgartirgich, faza muvozanati, chiqish kuchlanishi, intellektual diagnostika, elektrohujum, o‘lchash va nazorat
This article investigates the issues related to the recovery of metals from chemical industry wastes. Within the scope of the study, the chemical and phase compositions of the wastes were analyzed, and a modern…
This article highlights the regularities of the distribution of polymetallic (lead-zinc) mineralization in the carbonate formations of the Kulchulak deposit, as well as the principles of assessing forecast resources…
This article studies the physicochemical and technological properties of surfactants (SFM) obtained from the waste of the oil and gas industry - pistachio oil soapstock - for lubricating materials used in drilling oil…
This article examines the geological structure and metallogenic features of the Almalyk ore region, as well as the origin and interrelationships of lead-zinc and copper-porphyry deposits. Lead-zinc deposits were formed…
The article investigates the physicochemical properties of wastes and secondary products generated in the oil and fat industry. Their composition, processing potential, and methods for producing surface-active agents…
In this study, a flame-retardant composition based on a combination of boric acid, orthophosphoric acid (phosphate), urea, and zinc oxide (ZnO) was developed and chemically bog ‘ed onto 100% cotton and 50/50…
Based on the study, the compositions and quantities of rare and noble metals in the studied samples of ores and technogenic waste were determined, and new technological schemes were developed for the extraction of noble…
This study focuses on investigating the technogenic wastes of the gold extraction plant at the “Auminzo-Amantoy” mine of NMMC JSC and improving the technology for gold recovery from these materials. Chemical and…
This article examines the issues of processing oxidized copper ores of the Kalmakyr deposit, which is relevant in the modern mining industry. In recent years, due to the increasing share of oxidized and mixed ores in…
This article covers the nature of rock pressure formed in underground workings, its influence on the stability of workings, and the issues of determining calculation methods. The mechanism of dangerous processes, such…