This article presents the results of a study on the determination of the bank coefficient and the evaluation of velocity distribution in rectangular concrete-lined channels. The experiments were conducted in the laboratory of “Smart Solution System” LLC on the specially constructed K-2 channel. Nine verticals were selected across the channel cross-section, and velocity measurements were taken at depths of 10 cm, 23 cm, and 33 cm from the water surface. To improve accuracy, each measurement was repeated three times, and the final values were calculated as arithmetic means. The measurements were carried out using a Universal Muline (CM-32) hydrometric current meter and an electromagnetic flowmeter. Based on the obtained data, a specific formula for determining the bank coefficient was developed. The calculations showed that the value of the bank coefficient was T=0.92. Furthermore, the discharge determined from hydrometric measurements was Q=0.443 m³/s, which was very close to the discharge obtained from the electromagnetic flowmeter — Q=0.445 m³/s. The difference was only ΔQ=0.002 m³/s, corresponding to an error of 1%. The results demonstrated that flow velocity decreases sharply in the bank zones, while higher values are observed in the central part of the channel. The maximum velocity difference between the banks and the channel center was found to be Δϑ=16–29%. These findings apply to rectangular concrete-lined channels with a width of 2.5 m, whereas channels of different shapes and dimensions require further investigation.
| Mualliflar | Otakhonov, Maksud Yusufovich, Babajanov, Farrukhbek Karimovich, Allayorov, Davronjon Shamsiddinovich, Zakirov, Ilkhomjon Bakhtiyorugli, Отахонов, Максуд Юсуфович, Бабажанов, Фаррухбек Каримович, Аллаёров, Давронжон Шамсиддинович, Закиров, Илхомджон Бахтиёругли, Otаxonov, Mаqsud Yusufovich, Babajanov, Farruhbek Karimovich, Аllаyorov, Dаvronjon Shаmsiddinovich, Zokirov, Ilhomjon Bаhtiyoro‘g‘li |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-10-11 |
| Jild | 3 |
| Son | 3 |
| Betlar | 230-236 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.3.2025.38 |
DOI: 10.70769/3030-3214.srt.3.3.2025.38 · Maqolaning asl sahifasi
Bank coefficient, rectangular concrete-lined channel, current meter, electromagnetic flow meter, flow velocity, velocity distribution, laboratory experiments, vertical velocity profiles, Береговой коэффициент, бетонированный прямоугольный канал, гидрометрическая вертушка, электромагнитный водомер, скорость потока, распределение скоростей, лабораторные эксперименты, скорости по вертикали, Qirg‘oq koeffitsiyenti, beton qoplamali to‘g‘ri to‘rtburchak kanal, gidrometrik vertushka, elektromagnit suv o‘lchagich, oqim tezligi, tezlik taqsimoti, laboratoriya tajribalari, vertikal bo‘yicha tezliklar
This study shows how to “hit two targets with one math arrow”, trimming pressure drop (ΔP) down while cranking collection efficiency (η) up in industrial multi cyclone (MSC) dust collectors. A CFD based response surface…
The article discusses one of the promising areas of innovative development — the advanced processing of industrial waste, in particular, spent adsorbents containing aluminum oxide. A systematic approach is presented for…
Multicyclone dust collectors are considered essential devices for the removal of particulate matter from large industrial gas flows. In this study, a hybrid kinetic–dynamic modelling approach is proposed, combining a…
This scientific work examines the environmental and technological aspects of the utilization of aluminum-containing waste from the oil, gas, and chemical industries. The main focus is on synthesizing the coagulant…
This study investigates iron-bearing minerals in the mineralogical composition of phosphorites from the Khodzhakul and Porlytau deposits in Karakalpakstan and analyzes their impact on the agrochemical value of…
This article presents an in-depth study of the mining-technical and geological conditions of the Tyubegatan deposit, analyzing the possibilities of extracting industrial sylvinite layers in a safe and economically…
This article presents the development of an objective function for multi-criteria optimization of the energy efficiency of a hybrid biogas plant (HBP), integrated with photovoltaic (PV) systems and solar thermal…
This study focuses on investigating the technology for extracting colored metals from waste plant materials using the GMZ-2 sorbent. The negative impact of waste plant materials on the environment and the recycling of…
The results of the extraction of iron, copper, and precious metals from solid waste (cakes) of soda leaching of calcined molybdenum intermediate product are presented. According to IR spectroscopy and RFA data, the cake…
The development of scientifically grounded technologies for the processing of industrial wastes containing non-ferrous and precious metals is an important direction for improving the economic efficiency of mining and…