Cyclization products can be 5- or 6-membered ring compounds. The reactions leading to the formation of these hydrocarbons represent and -cyclization reactions. Platinum catalysts for the dehydrogenation of paraffins are highly dispersed multicomponent systems embedded in a heat-resistant oxide support with a developed surface. The concentration of platinum and promoters usually does not exceed 1% wt. The most common support is γ-alumina. Previously, similar platinum catalysts were widely used in the low-pressure reforming process. This allows us to explain the high efficiency of bimetallic aluminum-platinum dehydrogenation catalysts, which is maintained even with coke content of more than 10% by weight of the catalyst. In the synthesis of aromatic hydrocarbons based on synthetic naphtha, it was proven that the samples converted to aromatic hydrocarbons in the first pass when using the catalytic systems Cr2O7 catalyst and AlNiMo+bentonite catalyst. The combined use of these catalysts resulted in the formation of monoaromatic hydrocarbons from a mixture of naphtha hydrocarbons with a high mass fraction of n-hexane, n-heptane, and n-octane in high yield and demonstrated high selectivity for this synthesis.
| Mualliflar | Тошкобилов , Джавахир Шаймардонугли, Toshqobilov , Javoxir Shaymardono‘g‘li, Toshkobilov , Javokhir Shaymardonugli |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-03-18 |
| Jild | 3 |
| Son | 1 |
| Betlar | 190-194 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.1.2025.34 |
DOI: 10.70769/3030-3214.srt.3.1.2025.34 · Maqolaning asl sahifasi
cyclization reaction, bifunctional catalysts, dehydrocyclization of paraffins, n-hexane, carbonation, synthetic naphtha, реакция циклизации, бифункциональные катализаторы, дегидроциклизация парафинов, н-гексан, карбонизация, синтетическая нафта, siklizatsiya reaktsiyasi, bifunksional katalizatorlar, parafinlarni degidrotsiklizatsiyasi, n-geksan, karbonlanish, sintetik nafta
This article analyzes the improvement of the operating mode of pumping equipment with electric drives based on frequency control methods. Frequency control systems are of great importance in increasing the efficiency of…
A technology has been developed for extracting gold and silver through gravitational enrichment from the ores of the Olchalik field, located in Namangan region. In general, drill holes were excavated at various points…
Polymetallic ores contain valuable minerals such as galena, sphalerite, copper sulfides, and pyrite. The main method of enriching such ores is flotation, however, in some cases, preliminary gravitational enrichment is…
Reducing the negative impact of dust emissions from metallurgical furnaces on the atmosphere and working environment is one of the crucial environmental and technological challenges. This article examines the…
The article presents the results of field studies conducted in the territory of Nurafshan, as part of the engineering and seismological substantiation of the general plan for the development of the city. Geophysical and…
This article discusses the physicochemical properties of rhenium, its production methods, and applications. Methods for processing primary and secondary raw materials, including hydrometallurgical and pyrometallurgical…
This article analyzes methods for extracting rhenium from solutions, including the processes of precipitation of potassium perrhenate and ammonium perrhenate, precipitation in sulfide, and selective dissolution in…
This article analyzes the separation of the rock mass during underground mining through drilling and blasting operations, as well as the determination of the fracture degree of rock formations using software tools. In…
In this work, modern approaches to mathematical modeling of passive solar heating systems using energy-saving glass blocks are analyzed. Empirical, analytical, and numerical methods (including the finite element method…
In this scientific paper, a significant role in the study of the main causes of factors affecting the failure of ball mills is played by the rate of slip on the surfaces of coatings at the expense of the friction forces…