This article analyzes the separation of the rock mass during underground mining through drilling and blasting operations, as well as the determination of the fracture degree of rock formations using software tools. In determining the fracture degree of rock formations, the rock mass was classified into blocks, and the average separation sizes for different types of rock compositions were identified. The density and distribution characteristics of natural fractures within the internal structure of the rock formations were also examined.
| Mualliflar | Мислибаев , Илхом Туйчибаевич, Нурхонов , Хусан Алмирзаугли, Латипов , Зухриддин Ёкубугли, Mislibayev , Ilxom Tuychibayevich, Nurxonov , Xusan Almirzao‘g‘li, Latipov , Zuhriddin Yoqubo‘g‘li, Mislibaev , Ilkhom Tuychibaevich, Nurkhonov , Khusan Almirzaugli, Latipov , Zuhriddin Yokubugli |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashriyot | Қарши муҳандислик-иқтисодиёт институти |
| ISSN | 3030-3214, 2023-2026 |
| Nashr sanasi | 2025-03-16 |
| Jild | 3 |
| Son | 1 |
| Betlar | 54-57 |
| Til | Ingliz |
| Ilmiy soha | Geologiya-mineralogiya |
| DOI | 10.70769/3030-3214.srt.3.1.2025.30 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.70769/3030-3214.srt.3.1.2025.30 · Maqolaning asl sahifasi
fracture, block, drilling and blasting operations, rock mass, separation, density, porosity, permeability, underground mine working, strength, layer, structure, granulometric, трещиноватость, блок, буровзрывные работы, массив, отделение, плотность, пористость, водопроницаемость, подземная горная выработка, прочность, пласт, структура, гранулометрия, yoriqlik, blok, burg’ilash-portlatish ishlari, massiv, ajralma, zichlik, g’ovakdorlik, suv o’tkazuvchanlik, ye osti kon lahimi, mustahkamlik, qatlam, struktura, granulometrik
| APA | Мислибаев , Илхом Туйчибаевич, Нурхонов , Хусан Алмирзаугли, Латипов , Зухриддин Ёкубугли, Mislibayev , Ilxom Tuychibayevich, Nurxonov , Xusan Almirzao‘g‘li, Latipov , Zuhriddin Yoqubo‘g‘li, Mislibaev , Ilkhom Tuychibaevich, Nurkhonov , Khusan Almirzaugli, & Latipov , Zuhriddin Yokubugli (2025). IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION. Саноатда рақамли технологиялар, 3(1), 54-57. https://doi.org/10.70769/3030-3214.srt.3.1.2025.30 |
|---|---|
| GOST (OAK) | Мислибаев , Илхом Туйчибаевич va b. IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION // Саноатда рақамли технологиялар. – 2025. – T. 3, № 1. – P. 54-57. – DOI: 10.70769/3030-3214.srt.3.1.2025.30. |
| MLA | Мислибаев , Илхом Туйчибаевич, Нурхонов , Хусан Алмирзаугли, Латипов , Зухриддин Ёкубугли, Mislibayev , Ilxom Tuychibayevich, Nurxonov , Xusan Almirzao‘g‘li, Latipov , Zuhriddin Yoqubo‘g‘li, Mislibaev , Ilkhom Tuychibaevich, Nurkhonov , Khusan Almirzaugli, and Latipov , Zuhriddin Yokubugli. “IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION.” Саноатда рақамли технологиялар, 3(1), 54-57, 2025. https://doi.org/10.70769/3030-3214.srt.3.1.2025.30 |
| Chicago | Мислибаев , Илхом Туйчибаевич, Нурхонов , Хусан Алмирзаугли, Латипов , Зухриддин Ёкубугли, Mislibayev , Ilxom Tuychibayevich, Nurxonov , Xusan Almirzao‘g‘li, Latipov , Zuhriddin Yoqubo‘g‘li, Mislibaev , Ilkhom Tuychibaevich, Nurkhonov , Khusan Almirzaugli, and Latipov , Zuhriddin Yokubugli. “IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION.” Саноатда рақамли технологиялар, 3(1), 54-57 (2025). https://doi.org/10.70769/3030-3214.srt.3.1.2025.30 |
| Harvard | Мислибаев , Илхом Туйчибаевич, Нурхонов , Хусан Алмирзаугли, Латипов , Зухриддин Ёкубугли, Mislibayev , Ilxom Tuychibayevich, Nurxonov , Xusan Almirzao‘g‘li, Latipov , Zuhriddin Yoqubo‘g‘li, Mislibaev , Ilkhom Tuychibaevich, Nurkhonov , Khusan Almirzaugli, and Latipov , Zuhriddin Yokubugli (2025) ‘IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION’, Саноатда рақамли технологиялар, 3(1), 54-57. https://doi.org/10.70769/3030-3214.srt.3.1.2025.30 |
| BibTeX | @article{article2025,
title = {IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION},
author = {Мислибаев , Илхом Туйчибаевич and Нурхонов , Хусан Алмирзаугли and Латипов , Зухриддин Ёкубугли and Mislibayev , Ilxom Tuychibayevich and Nurxonov , Xusan Almirzao‘g‘li and Latipov , Zuhriddin Yoqubo‘g‘li and Mislibaev , Ilkhom Tuychibaevich and Nurkhonov , Khusan Almirzaugli and Latipov , Zuhriddin Yokubugli},
journal = {Саноатда рақамли технологиялар},
year = {2025},
volume = {3},
number = {1},
pages = {54-57},
doi = {10.70769/3030-3214.srt.3.1.2025.30},
url = {https://doi.org/10.70769/3030-3214.srt.3.1.2025.30}
} |
Boshqa maqola uchun iqtibos tayyorlash
This article shows the analysis of statistical models of the dependence of oil recovery on the rate of fluid withdrawal in terrigenous reservoirs and the justification of these models. Statistical dependencies are…
Currently, it is rapidly developing in the heat and nuclear power plants, chemical production, radio engineering and electrical engineering industries , mechanical engineering, IES, AES, food and pharmaceutical…
This аrticlе еxаminеs а mеthоd fоr еvаluаting thе frаctаl chаrаctеristics оf trаffic аnd аssеssеs thе stаtisticаl pаrаmеtеrs оf thе frаctаl dimеnsiоn оf IоT trаffic. It аnаlyzеs rеаl trаffic аlоngsidе аttаcks frоm thе…
This article studies the catalytic aromatization process of linear-structured N-hexane using mesoporous high-silicon zeolites with high catalytic properties. The influence of the nature and concentration of modifiers…
In this scientific paper, a significant role in the study of the main causes of factors affecting the failure of ball mills is played by the rate of slip on the surfaces of coatings at the expense of the friction forces…
This article discusses the physicochemical properties of rhenium, its production methods, and applications. Methods for processing primary and secondary raw materials, including hydrometallurgical and pyrometallurgical…
Reducing the negative impact of dust emissions from metallurgical furnaces on the atmosphere and working environment is one of the crucial environmental and technological challenges. This article examines the…
A technology has been developed for extracting gold and silver through gravitational enrichment from the ores of the Olchalik field, located in Namangan region. In general, drill holes were excavated at various points…
Cyclization products can be 5- or 6-membered ring compounds. The reactions leading to the formation of these hydrocarbons represent and -cyclization reactions. Platinum catalysts for the dehydrogenation of paraffins are…
This article analyzes the improvement of the operating mode of pumping equipment with electric drives based on frequency control methods. Frequency control systems are of great importance in increasing the efficiency of…
Саноатда рақамли технологиялар — barcha maqolalar · 2025-yil arxivi
The article analyses the classification of upland deposits studied by leading scientists of the world. About half of all mineral deposits developed now and planned for development in the future are located in…
Maqolada yer osti kon lahimlarini ankerli mustahkamlashda mineral kompozitsiyali ikki komponentli ampulalardan foydalanish samaradorligi tahlil qilingan. Turli kon-geologik sharoitlarda ankerlarning mahkamlanish…
Relevance: a gas-engine unit MWM TCG 3020 V20 with an electrical output of 2300 kW, installed in a mini-CHP modular building, is an intense noise source — the sound pressure level near the running engine reaches 100–105…
Relevance: The Kyrgyz Republic has a significant solar radiation resource, but its power sector relies mainly on hydropower, and the winter load peak coincides with the seasonal minimum of river flow. A consistent…
Relevance: Overhead transmission lines rated at 110–220 kV are essential components of regional power systems and the electricity supply infrastructure of large industrial enterprises. Increasing demand, changing…
Relevance: the work is driven by the need to analyze existing heat supply systems and research the integration of modern, non-traditional energy sources– alongside the implementation of digitalization in the thermal…
Relevance: oil-immersed power transformers are among the most expensive and critical components of power supply systems, and their failures cause significant economic losses and long outages. Existing online monitoring…
Relevance: the modern global power industry is undergoing a transformation from centralized generation systems to distributed ones with a high share of renewable energy sources (RES). This process is driven by the…