Data on the petrophysical characteristics of the Jurassic deposits of the Barsakelmes depression of the Ustyurt region, the features of their geological structure and possible oil and gas potential are presented. The analysis of the main geological factors is aimed at laboratory studies of the core material of the exploration well No. 1-p in the Razlomnaya area, with the aim of obtaining a holistic petrophysical picture of the open cut of the well for further optimal exploration and increasing its efficiency.
| Mualliflar | Джалилов , Гафур Ганиевич, Ахмедова , Дилфуза Азаматовна, Ганиева , Лайло Гафуркизи, Jalilov , G‘afur G‘anievich, Ahmedova , Dilfuza Azamatovna, Ganieva , Laylo Gafurkizi, Jalilov , Gafur Ganievich, Akhmedova , Dilfuza Azamatovna, Ganieva , Laylo Gafurkizi |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-02-18 |
| Jild | 3 |
| Son | 1 |
| Betlar | 123-128 |
| Til | Ingliz |
| DOI | 10.70769/3030-3214.srt.3.1.2025.19 |
DOI: 10.70769/3030-3214.srt.3.1.2025.19 · Maqolaning asl sahifasi
Ustyurt, Barsakelmes, Jurassic, oil and gas content, residual water saturation coefficient, specific electrical resistance (RES), porosity parameter (Rp), longitudinal ultrasonic wave propagation velocity (Vp), interval time (ΔT), saturation parameter (Pn), Устюрт, Барсакельмесский прогиб, юра, нефтегазоносность, коэффициент остаточной водонасыщенности, удельное электрическое сопротивление (УЭС), скорость распространения продольных ультразвуковых волн (Vp), интервальное время (ΔТ), параметр насыщения (Рн), Ustyurt, Borsakelmas egilmasi, yura, qoldiq suvga to‘yinganlik koeffitsiyenti, solishtirma elektr qarshiligi, g‘ovaklik parametri (Pp), bo‘ylama to‘lqinlarining tarqalish tezligi (Vp), interval vaqti (ΔT), to‘yinish parametri (Pn)
Petroleum gas is a mixture of light hydrocarbons that exists in the free state of oil in the form of associated gas in the form of bubbles and dissolved gas. It consists of limited hydrocarbons - methane, ethane…
The density of briquetted biomass is nearly 6 times higher than the original bulk density of the biomass. The available methods for processing products include thermo-chemical, physico-chemical, and biological methods…
The article is devoted to the study of natural factors that, to one degree or another, contribute to the formation of lenses of fresh groundwater in limestone and marl strata of Neogene deposits. According to the…
This article provides information on the evaluation of the characteristics of the correlation between the seismic and physical-mechanical properties of saline soils based on constructions in our country. Also, in this…
The article discusses the processes and various methods of hydrometallurgical processing of complex gold-bearing pyrite-arsenopyrite ores and concentrates, taking into account the advantages and disadvantages of these…
The article analyses the classification of upland deposits studied by leading scientists of the world. About half of all mineral deposits developed now and planned for development in the future are located in…
A technology for achieving high strength and wear resistance of chromolibden steels has been developed. Experimental studies have shown that short-term intensive heating followed by rapid cooling significantly increases…
This article analyzes the increase in the concentration of toxic gases in the mine atmosphere during the mechanical extraction of minerals from the rock mass, the movement of transport vehicles, and underground mining…
This article highlights the technological processes of the Khondiza Processing Plant, the methods applied to enhance processing efficiency, and the reconstruction works carried out. The plant specializes in the…
This article shows the analysis of statistical models of the dependence of oil recovery on the rate of fluid withdrawal in terrigenous reservoirs and the justification of these models. Statistical dependencies are…