Today, increasing the service life and strengthening of friction parts of agricultural machinery is one of the most important issues in the world. Increasing the strengthening and abrasion resistance of parts allows for extending the service life of the equipment and significantly reducing costs. Cementation of agricultural machinery parts is an effective method for solving these problems. Cementation is carried out to increase the hardness of the working surfaces of agricultural machinery and, at the same time, maintain the impact resistance of the internal part. This article analyzes cementation technologies used to improve the service life and quality of agricultural machinery parts. Various methods of cementation, their influence on mechanical properties, advantages of technological processes, and research results are presented. The positive impact of this process on the efficiency of agricultural machinery is also highlighted.
| Mualliflar | Турсунбоева , Шахноза Хусниддинкизи, Норхуджаев , Файзулла Рамазонович, Tursunboyeva , Shahnoza Husniddinqizi, Norxudjayev , Fayzulla Ramazonovich, Tursunboeva , Shakhnoza Khusniddinkizi, Norkhujaev , Fayzulla Ramazonovich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-02-12 |
| Jild | 3 |
| Son | 1 |
| Betlar | 170-175 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.1.2025.16 |
DOI: 10.70769/3030-3214.srt.3.1.2025.16 · Maqolaning asl sahifasi
chemical heat treatment, cementation, carbon impregnation, agricultural machinery, friction parts, renovation, heat treatment, strength, cutting part, химико-термическая обработка, цементация, углепропитка, сельскохозяйственная техника, трущиеся детали, реновация, термическая обработка, прочность, режущая часть, kimyoviy termik ishlov berish, sementatsiya, uglerod singdirish, qishloq xo‘jaligi texnikasi, ishqalanuvchi qismlar, renovatsiya, issiqlik ishlovi, mustahkamlik, kesuvchi qism
In agricultural product drying systems used in world practice, the energy consumption is high, and the specific energy consumption for the preparation of dried finished product is 7,4 kVt∙soat/kg. To prevent energy…
Amine solutions are widely used to remove sour components (primarily H2S and CO2) from natural gas and light hydrocarbon gases. Removal of solids from amine solutions is essential for the efficient operation of gas…
This article examines modern methods of lithium extraction from natural and technogenic sources. An analysis of various lithium-containing minerals and their processing technologies is presented. Special attention is…
Based on the requirements of today's industrialized world, many metallurgical plants have established the processing of secondary raw materials. This can be attributed to low ore reserves and the environmental disaster…
Scientists of Navoi State Mining and Technological University established the presence of saponite mineral in the composition of dolomite of Vaush deposit, located in Navbahor district of Navoi region. This was…
This article investigates the technology for extracting rare metals from low-grade technogenic waste. The authors examine the need for effective methods of processing technogenic waste to minimize their impact on…
This article presents information about the work of filling the extraction space with backfill mixtures in the conditions of the Kauldy mine. The indicators of the effective use of the backfill technology in…
Particular attention is paid to the improvement of existing technologies for increasing the volume of ore processing, utilization of man-made waste, difficult-to-process ores and off-balance low-grade waste, involvement…
It is shown that a radical way to expand the possibility of obtaining metals from reserve, unused natural resources is one of the possible options for using local raw materials. This article presents the results of a…
The safety of working conditions in underground mining is considered one of the important issues of the modern mining industry. This article focuses on the legal framework of security and international practice…