This paper examines the patterns governing the initiation and development of bending vibrations in flexible packet-type working bodies of technological machines. The principal types of transverse forces forming the dynamic state of the structure are analyzed. Based on Hamilton’s variational principle, differential equations describing free bending vibrations are derived. A generalized representation of the mass distribution of disk elements is developed, and boundary conditions are formulated for various methods of fixing the working body. The obtained relationships can be applied in the calculation of critical rotational speeds, vibration stability, and dynamic reliability of machines.
| Mualliflar | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, Umarov, Akmal |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2026-03-30 |
| Jild | 11 |
| Son | 1 |
| Betlar | 271-277 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.61151/stjniet.v11i1.1005 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v11i1.1005 · Maqolaning asl sahifasi
flexible packet-type working body, bending vibrations, critical frequency, machine dynamics, elastic axis, damping
| APA | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, & Umarov, Akmal (2026). BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES. Наманган муҳандисликтехнология институти илмийтехника журнали, 11(1), 271-277. https://doi.org/10.61151/stjniet.v11i1.1005 |
|---|---|
| GOST (OAK) | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, Umarov, Akmal BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2026. – T. 11, № 1. – P. 271-277. – DOI: 10.61151/stjniet.v11i1.1005. |
| MLA | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, and Umarov, Akmal. “BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES.” Наманган муҳандисликтехнология институти илмийтехника журнали, 11(1), 271-277, 2026. https://doi.org/10.61151/stjniet.v11i1.1005 |
| Chicago | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, and Umarov, Akmal. “BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES.” Наманган муҳандисликтехнология институти илмийтехника журнали, 11(1), 271-277 (2026). https://doi.org/10.61151/stjniet.v11i1.1005 |
| Harvard | ABDUVAKHIDOV, MUTAKHKHIRKHON, Mirjalolzoda, Bobirmirzo, and Umarov, Akmal (2026) ‘BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES’, Наманган муҳандисликтехнология институти илмийтехника журнали, 11(1), 271-277. https://doi.org/10.61151/stjniet.v11i1.1005 |
| BibTeX | @article{abduvakhidovmutakhkhirkhon2026,
title = {BENDING VIBRATIONS OF FLEXIBLE PACKET-TYPE WORKING BODIES OF TECHNOLOGICAL MACHINES},
author = {ABDUVAKHIDOV, MUTAKHKHIRKHON and Mirjalolzoda, Bobirmirzo and Umarov, Akmal},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2026},
volume = {11},
number = {1},
pages = {271-277},
doi = {10.61151/stjniet.v11i1.1005},
url = {https://doi.org/10.61151/stjniet.v11i1.1005}
} |
Boshqa maqola uchun iqtibos tayyorlash
This study investigates the production of magnesium chloride from magnesium-containing brines by the isothermal method at 25 °C within the quaternary system 2Na⁺, Mg²⁺ // SO₄²⁻, 2Cl⁻ – H₂O. Natural brines of the Alat…
Currently, the high cost of metal, as well as the harsh and often extreme operating conditions faced by oil and gas equipment in a sharply continental climate, significantly exacerbate the challenge of improving its…
In this study, Na-A type zeolite with high crystallinity was synthesized hydrothermally from NaAlO₂ and Na₂SiO₃ precursors. The obtained Na-A zeolite was converted into Li-A zeolite through stepwise ion exchange using…
In the article, the working scheme and experimental design of the device for cleaning cotton from small impurities have been developed. In this study, the improved device was tested for its efficiency and energy…
This article investigates the chemical and mineralogical composition of rocks from the mountainous areas of Chortoq District, Namangan Region, using modern instrumental analytical methods, namely energy-dispersive X-ray…
This paper presents a theoretical investigation of the dynamics of packet-type working bodies of technological machines under bending vibrations. Structural configurations with relatively short packets of disk elements…
This article examines the enhancement of enterprise competitiveness through the implementation of green technologies, with a specific focus on Public–Private Partnership (PPP) mechanisms. The study was conducted between…
Improving the quality of services in the higher education system is ensured by the correct allocation of resources,their strategic management and the use of performance-oriented approaches. This article provides a…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2026-yil arxivi
The article reports on the study of bending and torsion of a package of alternating flat working and spacer disk elements, assembled by means of longitudinal compressive force. As a result, a phenomenological method for…
There is a big use as carrying elements in technology and worker organ’s component design of technology. In article is organized review of the questions of the using and determinations mechanical parameters of component…
In article about torsion fluctuation worker of the organ, consisting of package compressed by sprained gross disc element, working as monolithic body, and influence upon its torsion of the fluctuation of the sidebar…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
In the article, one of the most important results is that the magnitude of the bending rigidity of the saw working element package is a function of only the magnitude of the compression force of the package and the…
This paper presents a theoretical investigation of the dynamics of packet-type working bodies of technological machines under bending vibrations. Structural configurations with relatively short packets of disk elements…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…