Prpeller ends seed roller rotation towards 60 degrees bent and bent 16 mm long mixer, Namangan region Related to "Namangan Pakhta TEKS" LLC Kosonsoy cotton cleaning to the 5LP linter in the enterprise installed and linter improved. Improved in order to study the effectiveness of the linter, a comparison-research work was carried out with a 5LP linter with an existing mixer in the Andijon-36 selected cotton grade I and III technical seed at a distance of 9-12 mm with the mixer blades selected on the basis of theoretical and practical research. In the comparative work, the fluffiness of the seed after the linter was 6.85-8.24% on average, and the damage was on average 5.42-4.25%. showed an average of 0.34 (abs)% to 0.27 (abs)% less than seed hairiness and an average of 0.36 (abs)% to 0.4 (abs)% less than damaged seed. The mass fraction of impurities and whole seeds in the lint produced changed from an average of 5.96 % to 5.38 %, compared to the mass fraction of impurities and whole seeds in the fluff produced from the existing 5LP linters from 0.51 (abs)% to 0.77 (abs ) decreased by %. The staple length of the fluff is 6/7 mm, and due to the improvement of its quality, according to the state standard UzDst 645:2016, it corresponded to the I type B type "Middle" class. In this case, the productivity of the linter changed from 693 kg/h to 745 kg/h for seed, and from 27.9 kg /h to 24.8 kg /h for fluff, compared to the productivity of the existing 5LP linter taken for the experiment by 70 kg /h . It was found to be higher than 2.5 kg /h to 3.1 kg/h for fluff at 34 kg /h .
| Mualliflar | Nomanov, Mirjalal |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-12-30 |
| Jild | 10 |
| Son | 4 |
| Betlar | 246-252 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i4.941 |
DOI: 10.61151/stjniet.v10i4.941 · Maqolaning asl sahifasi
Linter, mixer, parcher, saw cylinder, working chamber, seed roller, cotton, seed, fluff, hairiness, damage, productivity, quality
The article presents the results of a study aimed at optimizing the technological parameters of the spinning process using methods of mathematical experiment design and modeling. The main focus is on the influence of…
The article analyzes the properties of yarns used in circular knit fabrics, which are currently in high demand, as well as the research conducted by scientists in this field. Based on these analyses, conclusions were…
It has been proven that the increase in the productivity of the gin machine necessarily occurs with an increase in the density of the raw material. However, with an increase in density, the productivity increases up to…
This article analyzes scientific research conducted on vibratory cleaning devices. Based on the analysis, a new vibratory cleaning machine with longitudinal and transverse cross-sections of cosinusoidal and sinusoidal…
This article examines the possibilities of improving the knowledge level of students in higher education institutions using test tasks.
This article proposes an intelligent control algorithm based on soil moisture and weather (meteorological) data to develop an effective irrigation regime for agricultural lands. The system collects and analyzes data in…
This article analyzes the impact of implementing modern HR technologies on the efficiency of enterprises. As digital transformation accelerates, tools such as automation, artificial intelligence, HR analytics, and…
This article develops mathematical models for the deformation of structural elements such as rods under spatially dynamic loading. The resulting vibration equations are described by systems of second-order partial…
This study investigates the synthesis of surfactants based on higher fatty acids and their physicochemical characterization. Natural and synthetic fatty acids with different hydrocarbon chain lengths were used as raw…
In this paper, the influence of the difference in the length of individual threads on the quality of the thread during the winding process was determined. These values were plotted on a graph and analyzed for the…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar