In dusty atmospheric conditions, various dust particles settle on their surface, which, depending on their thickness, damage the tempered glass, reduce the service life of the panels, and also prevent photovoltaic elements from receiving more sunlight, as a result, their temperature increases, the output power, short-circuit current and, therefore, the efficiency factor decrease by up to 50%. Therefore, in order to increase the efficiency and maintain the operability of solar panels, it is considered important to examine the solar panels of solar photovoltaic stations for dustiness This article considers a photovoltaic station, which was built first on the territory of Uzbekistan. This station, with a capacity of 130 kW, was launched in test mode so that test modern four type of solar in the natural and climate conditions of Uzbekistan, train personnel in the field of solar energy, improve skills in the operation of photovoltaic station, as well as to identify practical conclusions on the basis of which in the future to choose the most effective solutions It was determined that with a contaminated optical area, as well as the absence of cooling and orientation mechanisms, short circuit current of a 250 W solar panel deviates on average from the rated value by almost 27 %, and after cleaning the deviation is 12,85 %, which means that it is possible to increase short circuit current by an average of 10-15 % by regularly cleaning the surface, thereby increasing the generation of the solar power stations itself.
| Mualliflar | Sodiqov, Timur |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2025-09-30 |
| Jild | 10 |
| Son | 3 |
| Betlar | 263-269 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.61151/stjniet.v10i3.828 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v10i3.828 · Maqolaning asl sahifasi
Renewable energy sources, photovoltaic station, a solar panel, electricity, electrical parameters, carbonate anhydride, dust, cleaning system
| APA | Sodiqov, Timur (2025). 621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION. Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 263-269. https://doi.org/10.61151/stjniet.v10i3.828 |
|---|---|
| GOST (OAK) | Sodiqov, Timur 621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2025. – T. 10, № 3. – P. 263-269. – DOI: 10.61151/stjniet.v10i3.828. |
| MLA | Sodiqov, Timur. “621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 263-269, 2025. https://doi.org/10.61151/stjniet.v10i3.828 |
| Chicago | Sodiqov, Timur. “621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 263-269 (2025). https://doi.org/10.61151/stjniet.v10i3.828 |
| Harvard | Sodiqov, Timur (2025) ‘621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION’, Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 263-269. https://doi.org/10.61151/stjniet.v10i3.828 |
| BibTeX | @article{sodiqovtimur2025,
title = {621.383 RESEARCH OF MECHANICAL PART OF SOLAR PHOTOVOLTAIC POWER STATION},
author = {Sodiqov, Timur},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2025},
volume = {10},
number = {3},
pages = {263-269},
doi = {10.61151/stjniet.v10i3.828},
url = {https://doi.org/10.61151/stjniet.v10i3.828}
} |
Boshqa maqola uchun iqtibos tayyorlash
In this article, methods for solving systems of equations using the graphical approach in MS Excel are presented. The theoretical foundations of the graphical solution method are explained, and the steps for using Excel…
This research primarily focuses on designing dual-layer knit fabric architecture with patterned warp on a scientific basis, improve the technology of their production, and analyze their mechanical and functional…
In this scientific study, the physical and mechanical properties of hosiery products produced by mixing cotton, polyester, viscose and spandex yarns in different proportions with bamboo yarn were studied. In this study…
This article presents the results of the analysis of the magnetocaloric effect (MCE), its physical nature, and the prospects for its application in magnetic cooling systems. Special attention is paid to the…
Abstract: The improvement of saw gin machines, particularly their roll boxes, plays a crucial role in increasing the efficiency of cotton processing in the textile industry. The density of the seed roll inside the roll…
Abstract: The paper presents a review of literature articles devoted to the study of the effect of dye on the operation of solar cells based on titanium oxide. The absorption coefficient of the organic dye based on…
To involve the dust of the "Bekabad" metallurgical combine in the production of complex NPK fertilizers, studies were conducted on several factors such as the duration of processes, the ratio of solid and liquid…
Maqolada To‘raqo‘rg‘on paxta tozalash korxonasida ishlab chiqarilayotgan Andijon 36 paxta navining arrali jindan oldingi paxta tolasi va arrali jindan keyin ajratib olingan tolada o‘tkazilgan laboratoriya taxlil…
Cotton fiber quality is a key determinant of textile performance, influencing yarn strength, softness, and fabric durability. This study examines the major factors affecting cotton fiber quality throughout the…
The purpose of the research is to obtain room temperature superconducting phases in ceramics based on bismuth cuprates using solar technology. The synthesis of BSCCO was carried out using the “Solar Fast Alloys…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2025-yil arxivi
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…