This article substantiates the possibility of increasing the productivity and efficiency of cleaning process machines by improving the design of the screw cleaner, which ultimately allows you to get high-quality products. Also, the factors affecting the movement of raw cotton in the chute of the device are determined, a scheme for calculating the movement of raw cotton together with the flow of hot air in the feed zone, as well as the forces acting on the surface of the mesh is presented. To solve the problem of the process of feeding the flow of raw cotton in a stationary mode, it is established that the pressure must be positive at an arbitrary section of the cross-section. In the article, using the Maple program, the dependence of the flow of raw cotton Q is determined for different values of the filling factor of the flow of raw cotton transferred from the hopper of the device, which are presented in the form of graphs.
| Mualliflar | Tojimirzaev, Sanjar, Sobirov, Doniyor |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-09-30 |
| Jild | 9 |
| Son | 3 |
| Betlar | 41-47 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i3.523 |
DOI: 10.61151/stjniet.v9i3.523 · Maqolaning asl sahifasi
seed, cotton, screw cleaning, blow, process
This study delves into the aerodynamic characteristics of a newly designed multi-cyclone device, with an emphasis on its performance analysis and optimization. Multi-cyclone systems are widely used in industrial…
In this article, it was considered expedient to obtain sulfur concrete based on organic compounds. Silico-PB(siliko-polibutadien) and PEM(poliefirmaleinat) were used as modifiers. The corrosion resistance of the…
Multi-cyclone devices are widely used in industrial air purification systems, yet improving their efficiency remains a topic of continuous research. This article analyzes the methods and new approaches aimed at…
The article presents the results of research on the purification of aqueous solutions of used-saturated ethanolamines from toxic compounds by a three-stage filtration method. In the study, the purification process of…
Our scientists have been conducting research for several years to automate and improve the uniform distribution of cotton raw materials to sawing machines. This article analyzes the theoretical studies presented on the…
Objective. Goal. Worldwide, wastewater is characterized by pollution, a great danger to the environment and all forms of life.Therefore, before draining contaminated water, it must be properly treated to mitigate its…
This article presents the results of experimental studies conducted in laboratory conditions to investigate the impact of the saw spacing in linting equipment, enhanced with a working gin chamber, on the performance of…
This article is devoted to the construction of Weivlet models, which are considered important in digital processing of Biomedicine signals. These models were built using Dobeshi veyvlets. Dobeshi Weyvlet models have…
The article considers the most important factors in the analysis of modern assortments of materials with compression properties. For the design of compression sports garments, fabric samples were selected, their…
During the formation of the fabric, various dynamic processes took place, including fluctuations in the threads. The article covers the technology of computer modeling of technological processes on example of the…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar