The objective of this study is to comprehensively investigate the structural, physicochemical, and functional properties of secondary raw materials obtained from acetylene production (VSPA) and to assess their suitability and effectiveness as active carbon fillers in composite elastomeric materials. Special attention is given to the relationship between surface chemistry, morphology, and reinforcing ability in elastomer systems. The subject of research was VSPA obtained during the pyrolysis of natural gas. A variety of instrumental and analytical techniques were used to gain an in-depth understanding of the material. Chemical composition was examined by elemental analysis, the surface functional groups and aromatic structural were observed by FTIR as well as PMR spectroscopy and the paramagnetic properties of the particle were investigated using EPR technique. Nitrogen, phenol, and CTAB adsorption methods were used to measure the specific surface area and adsorption capacity. Morphology features such as particle size distribution, average particle diameter, bulk density and dispersity were also investigated. Furthermore, the toluene-soluble low-molecular hyper static oligomers were extracted and analyzed for their chemical structure and reactivity. The materials were compared systematically with ones of industrial technical carbon types (T 900, P 701, P 705 and P 803). Results show that VSPA has good degree of particle dispersion, high specific surface area and higher content of oxygen and hydrogen functional groups. The extracted oligomer (12–15 wt. %, M ≤ 1000) with carboxyl, phenolic, quinone and lactone groups that can strongly interact with the polymer matrix. The high iodine numbers and oil absorption values are believed to bear witness of rougher surfaces and higher polyconjugation, which will favor the spreadability and adhesion within elastomeric systems. A new theoretical approach and model VSPA particle, based on microencapsulated core shel structure with a carbon-based core and polymer–oligomer shell system are presented in this study, thus increasing the computational insight on functionalized carbon fillers. VSPA is an encouraging as well as cost-efficient and sustainable substitute for traditional carbon fillers, with the potential to promote waste valorization and environmentally friendly material design in rubber processing. The study is confined to laboratory scale tests and further research will be required for an evaluation of the processing characteristics and long-term performance of VSPA filled elastomers under industrial/service conditions.
| Mualliflar | Dilnoza Nigmatova, Sobirov, Jasurbek, Ibadullaev , Axmadjan, Mamaev , Sherali, Barno , Begalieva |
|---|---|
| Jurnal | Innovative Multidisciplinary Journal of Applied Technology |
| Nashr sanasi | 2026-02-11 |
| Jild | 4 |
| Son | 2 |
| Betlar | 9-15 |
| Til | Ingliz |
| DOI | 10.51699/wjqq3b47 |
DOI: 10.51699/wjqq3b47 · Maqolaning asl sahifasi
VSPA, acetylene production waste, carbon fillers, elastomer composites, surface functional groups.
The study aims to investigate the influence of furan oligomers and local carbon fillers on the technological and operational properties of rubber compounds based on butadiene-nitrile elastomers. Key objectives include…
Preventive fire safety management is continually challenging in developing countries, which is a global consequence of spontaneous urban growth, excessive infrastructure density, and overworked supervisory resources…
Aquatic ecosystems in rapidly urbanizing regions are increasingly threatened by emerging contaminants such as microplastics which pose significant ecological and human health risks due to their persistence…
This article presents the distinctive characteristics of methods for determining an important qualitative characteristic of wool fibers such as fineness, which determines the different industrial purposes of wool and is…
This study examined the level of administrative assistance and its relationship to teachers’ readiness to integrate technology in teaching in schools of District 3, Cluster 5 of San Carlos City, during the School Year…
Ultrasound imaging is widely used in medical diagnostics due to its safety, real-time capability, and cost-effectiveness. Nonetheless, images produced by ultrasound are prone to speckle noise, low contrast and sharp…
Introduction of technology of Reliable provision of seismic and fire safety of buildings and structures is still one of the most important challenges in engineering, especially in seismic regions like Uzbekistan. Recent…
This article comprehensively examines the theoretical foundations of establishing a quality management system in the construction materials industry, the stages of its implementation, and the mechanisms for its…
Secondary fires ignited by earthquakes, are common, which can aggravate human and infrastructure casualties and lengthen the period of relief operation. All this, means that efficient extinguishing of such fires…
Low-dose radiobiology focuses on the biological effects of ionizing radiation at absorbed doses that are less than about 100 mGy or low dose rates (less than 10 mGy/h -1). These exposures are common, and they include…
Innovative Multidisciplinary Journal of Applied Technology — barcha maqolalar