Standardization and the Improvement of Non autoclaved Aerated Concrete Quality in Modern Construction: A Review In the introduction, the authors explain that conditions of large-scale production of construction units, coupled with regulatory reforms in the field of building materials, have made great demands on the production of lightweight, cost effective, and energy efficient materials. In long-lasting experience with aerated concrete, this gap of knowledge had been settled but not on the basis of an applied methodology standardised in regard to the use of chemical additives, mainly carboxymethyl cellulose, as well as for their effects on physical-mechanical properties in non autoclaved production systems. It uses a blended study design, one of experimental and regulatory based. Concrete compositions were made from Portland cement, sand, aluminum powder, and a three-percent aqueous solution of carboxymethyl cellulose. Sample preparation, curing, and testing procedures were performed following related GOST standards to determine their density, compressive strength, contents of moisture as well as structural properties. A comparative study of conventional composition and modified composition mixtures. The results confirm that carboxymethyl cellulose can be used as an additive to enhance pore uniformity, pore structure strength development characteristics and overall stability of the material. The results verify that, among different additive concentrations, three percent provides the optimal performance, which results in a higher concrete grade, better density control, and higher thermal efficiency without need for autoclaving. The final results clarify that the controlled application of carboxymethyl cellulose in the production of non-autoclaved aerated concrete delivers both practical and economic advantages. Such results are significant in relation to sustainable construction practices, regulatory compliance, and development of lightweight readily applicable building materials for industrial scale.
| Mualliflar | D.G, Pulatova, Akhundjanov, Akhundzhanov. K.A. |
|---|---|
| Jurnal | Innovative Multidisciplinary Journal of Applied Technology |
| Nashriyot | ТДТУ Қўқон филиали |
| ISSN | 2995-486X, 2995-486x |
| Nashr sanasi | 2025-12-22 |
| Jild | 3 |
| Son | 12 |
| Betlar | 84-90 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.51699/scr8zh12 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.51699/scr8zh12 · Maqolaning asl sahifasi
Standardization, Advantages of standardization of building materials, CMC (Carboxymethylcellulose) GOST 25845-89
| APA | D.G, Pulatova, & Akhundjanov, Akhundzhanov. K.A. (2025). Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete. Innovative Multidisciplinary Journal of Applied Technology, 3(12), 84-90. https://doi.org/10.51699/scr8zh12 |
|---|---|
| GOST (OAK) | D.G, Pulatova, Akhundjanov, Akhundzhanov. K.A. Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete // Innovative Multidisciplinary Journal of Applied Technology. – 2025. – T. 3, № 12. – P. 84-90. – DOI: 10.51699/scr8zh12. |
| MLA | D.G, Pulatova, and Akhundjanov, Akhundzhanov. K.A. “Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete.” Innovative Multidisciplinary Journal of Applied Technology, 3(12), 84-90, 2025. https://doi.org/10.51699/scr8zh12 |
| Chicago | D.G, Pulatova, and Akhundjanov, Akhundzhanov. K.A. “Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete.” Innovative Multidisciplinary Journal of Applied Technology, 3(12), 84-90 (2025). https://doi.org/10.51699/scr8zh12 |
| Harvard | D.G, Pulatova, and Akhundjanov, Akhundzhanov. K.A (2025) ‘Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete’, Innovative Multidisciplinary Journal of Applied Technology, 3(12), 84-90. https://doi.org/10.51699/scr8zh12 |
| BibTeX | @article{dgpulatova2025,
title = {Standardization and Quality Assurance of Non-Autoclaved Aerated Concrete},
author = {D.G, Pulatova and Akhundjanov, Akhundzhanov. K.A.},
journal = {Innovative Multidisciplinary Journal of Applied Technology},
year = {2025},
volume = {3},
number = {12},
pages = {84-90},
doi = {10.51699/scr8zh12},
url = {https://doi.org/10.51699/scr8zh12}
} |
Boshqa maqola uchun iqtibos tayyorlash
Data visualization, interoperability, analysis, and business decisions face a significant challenge as a result of the growing volumes of heterogeneous data being produced by agencies and institutions in the education…
Colorectal cancer (CRC) is the second most common cause of cancer-related death in the world, and early detection of adenomatous polyps with colonoscopy is important because it can prevent CRC. Nonetheless, traditional…
The accuracy of the LightGBM model in forecasting oil and gas probability maps had been evaluated based on MapOil analytic system. Integration of geological, geophysical, satellite and topographic map datasets in single…
Thermal therapies namely, thermal ablation, hyperthermia, and laser play an important role in the treatment of various medical conditions especially, malignancies focusing on tumor/tumor-like tissues. These therapies…
We invest.igate the conc.ept of semi-.strong (s-s.trong) and semi.-weak (s-.weak) sets in topolo.gical spa.ces. We beg.in by giv.ing defini.tions, some exam.ples and fundam.ental characte.ristics for the two sor.ts of…
Considering that the world's primary tillage area is 4.2 billion hectares, the development of high-quality, energy-efficient and resource-efficient soil tillage machines and tools is one of the important tasks. This…
The vertical launch system has been widely adopted to land- and sea-based guided missile systems, because of its excellent operation flexibility, quick response capability and effective utilization of the space volume…
The logistics sector involves complex operations that require a high level of precision and efficiency. In recent years, the use of big data has revolutionized the logistics industry, providing companies with valuable…
The Internet of things (IoT) refers to the billions of physical devices around the world that are now connected to the Internet, all collecting and sharing data. It is a paradigm where physical objects, devices, and…
Low-dose radiobiology focuses on the biological effects of ionizing radiation at absorbed doses that are less than about 100 mGy or low dose rates (less than 10 mGy/h -1). These exposures are common, and they include…
Innovative Multidisciplinary Journal of Applied Technology — barcha maqolalar · 2025-yil arxivi
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…
The paper analyzes grate constructions used in cotton cleaners for removing large impurities. The aim is to systematize the advantages and limitations of stationary round, triangular and trapezoidal grate bars and to…
Relevance: a gas-engine unit MWM TCG 3020 V20 with an electrical output of 2300 kW, installed in a mini-CHP modular building, is an intense noise source — the sound pressure level near the running engine reaches 100–105…
Relevance: The Kyrgyz Republic has a significant solar radiation resource, but its power sector relies mainly on hydropower, and the winter load peak coincides with the seasonal minimum of river flow. A consistent…