The article considers the results of the analysis of autotransformers operation mode monitoring. The time diagram of active load current and oil temperature of autotransformer TashTES AT-3 is established and during one year changes of these variables and basic parameters of autotransformer were observed. Technical faults of the power transformer and high power autotransformer are established and methods of their elimination are determined. Damage of transformers and autotransformers with voltage of 110-500 kV of about 30% of the total number of outages which were accompanied by internal short-circuits and two main causes of damage were determined. The main causes of technological failures, which were not accompanied by internal short-circuits, are as follows: 20% of failures in operation of the onload tap-changer, 16% of oil leaks from the bushings, 13% of oil leaks and lowering of oil from the transformer due to violation of welded joints and rubber seals, 4% of engine damage to oil pumps of the cooling system, 3% of pressure increase in high-voltage hermetic bushings, 2% of film protection shell damage. The main reasons of technological violations accompanied by internal short-circuit in the transformer are as follows: breakdown of internal insulation of highvoltage bushings, insufficient short-circuit resistance, wear and tear of winding insulation, breakdown of insulation.
| Mualliflar | Farxod Isakov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2019-06-11 |
| Jild | 2019 |
| Son | 1 |
| Betlar | 209-217 |
| Til | en |
| DOI | 10.51346/tstu-01.18.2.-77-0016 |
DOI: 10.51346/tstu-01.18.2.-77-0016 · Maqolaning asl sahifasi
The lithological-facies factor is considered with the aim of studying the natural and geological conditions in which hydrogen sulfide waters are formed in gas and oil fields in the artesian basins of the Republic of…
The article considers the investigation results of the working process of diesel on light fuel. Consumption of natural resources in the form of hydrocarbon fuels, which is steadily increasing in transport, the number of…
Analysis of geological prospecting, geological surveying, geochemical and other materials of the territory of the Malguzar Mountains allows us to note that here the ore-bearing formations are Silurian formations…
The article discusses the preparation of some thermodynamic parameters characterizing the final product of complex radical polymerization of amino alkyl acrylate derivatives containing both methacrylate and alkyl groups…
There is justification for a simulation model for assessing channel level protocols. The effect of the data link layer protocol parameters on the data transfer function is analyzed. The data link protocol parameters…
The article deals with the development of a synthesis algorithm in the sense of the optimal control of multidimensional dynamic objects by the criterion of speed. To solve this problem, we propose a modified method…
Studies are often conducted to minimize the effect of vibration on equipment and its mechanisms. Since the engine is the main driving force of all technical objects, vibration is one of the factors hindering its…
. The article discusses the method of approximation transformations for the study of a typical mechanical object with distributed parameters. A mathematical description of an object with distributed parameters, which is…
The article critically analyzes traditional methods of forming drops of defoliants and liquid chemicals. As an object of study, a sprayer with a perforated turbulator was selected, which ensures the formation of fine…
Тошкент давлат техника университети хабарлари — barcha maqolalar