A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach (control based on a predictive model) to control is determined in the sequential execution of the following operations: using a predictive model, minimizing the quality functional, taking into account process dynamics, solving the optimal control problem, real-time control and taking into account process limitations.
| Mualliflar | Ildar Rafkatovich Sultanov |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2024-02-29 |
| Jild | 2024 |
| Son | 1 |
| Betlar | 39-46 |
| Til | en |
| DOI | 10.59048/2181-1105.1545 |
DOI: 10.59048/2181-1105.1545 · Maqolaning asl sahifasi · PDF
The paper presents the results of a study of the physico-chemical characteristics of the liquid fraction of products of thermal oxidative pyrolysis of worn tires. The mass fraction of the volatile gas compounds, the…
Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile…
This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern…
The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of…
The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage…
A significant factor influencing climate change is the release of carbon dioxide (CO2) into the atmosphere as a consequence of human activities such as the combustion of fossil fuels. Climate change can be slowed down…
The article is devoted to the analysis of the distribution of the magnetic field in the magnetic conductors of a wide-range current transformer for the development of a mathematical model that can be used as the basis…
In this work, based on the theory of barycentric coordinates and simplexes, a linear interpolation method is proposed for modeling and controlling the operation of multiparameter converters. It has been determined that…
Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of…
The issue of control the lifecycle of technological complexes of multicomponent mixtures is considered, taking into account the uncertainty of parameters. Among uncertainties such as parameter uncertainty, model…