The article examines the laws of distribution of magnetic voltage and magnetic flux in magnetic circuits of measuring transducers with distributed resistance parameters of long ferromagnetic rods and magnetic capacitance between them and a transverse distributed excitation winding using the example of a magnetic circuit of a new magnetically elastic force converter. It is established that in such magnetic circuits, the magnetic voltage changes its sign when passing through the section of the magnetic neutral, and the magnetic flux in the magnetic neutral has a maximum value, with a fixed value of the length of the distributed excitation winding, the nonlinearity of the change in the absolute value of the magnetic voltage, and the rate of decrease of the magnetic flux from this section towards the end parts of the magnetic circuit depends on the value the attenuation coefficient of the magnetic flux: the greater the value of this coefficient, the greater the degree of nonlinearity of the absolute value of the magnetic voltage and the rate of change of the magnetic flux along the length of the magnetic circuit. It is shown that in such magnetic circuits, at a fixed value of the magnetic flux attenuation coefficient, the nonlinearity of the change in the absolute value of the magnetic voltage and the rate of decrease of the magnetic flux from this section towards the end parts of the magnetic circuit at a rate depending on the value of the length of the distributed excitation winding: the greater the value of the length of the distributed excitation winding, the less the degree of nonlinearity of the absolute value the magnetic voltage and the rate of change of the magnetic flux along the length of the magnetic circuit.
| Mualliflar | Javharbek Fayzullayev, Kamika Jurayeva, Usmon Mukhtorov |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2024-10-24 |
| Jild | 2024 |
| Son | 5 |
| Betlar | 68-78 |
| Til | en |
| DOI | 10.59048/2181-1105.1632 |
DOI: 10.59048/2181-1105.1632 · Maqolaning asl sahifasi
The given paper presents the flow distribution in magnetic circuits of measuring transducers with distributed resistance parameters of long ferromagnetic rods and the magnetic capacitance between them and a concentrated…
This article is dedicated to developing a generalized structural-parametric conceptual model of the electromagnetic mechatronic module. The design of a mechatronic module based on an electromagnetic linear motor, which…
The paper deals with developing a mathematical model for a system of intelligent process control in brewing, focusing on the critical parameters of fermentation: temperature, pressure, and pH level. Mathematical models…
The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary…
The method of controlling the rectification process using fuzzy control based on fuzzy logic is studied. The structural scheme of the rectification process control system based on fuzzy logic is proposed. The analysis…
This study analyzed the effects of different degumming methods on the rapeseed and sunflower oils. Water degumming, acid degumming, and TOP degumming have been employed to reduce the content of phospholipids (P)…
The work is devoted to the issue of increasing the accuracy of liquid flow measurement devices, containing a primary measuring transducer for measuring the pressure drop in a narrowed section of a pipeline, temperature…
This article presents research models, physical processes and mathematical expressions of the processes, quantities and parameters in the elements and structures of three-phase electromagnetic current transformers used…
This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important…
A principle has been proposed for constructing computer simulators for improving the qualifications of process control operators at industrial enterprises and for training students of higher educational institutions…