The aim of research is to study the new method of thermochemical synthesis of yttrium-aluminum garnet luminescent powder, cerium doped (Y3Al5O12:Се3+, YAG:Ce) using the nitric acid salts of yttrium, aluminum and cerium, with the mixture of carbamide and hexamethylenetetramine used as fuel. Synthesis was performed in a microwave oven with the power of 800 W and frequency of 2450 MHz in a porcelain crucible closed with a perforated heat-resistant cover. The average size of coherent scattering region (CSR) of YAG:Ce particles (nominal diameter D) obtained in the crucible during the microwave heating is 50.3 nm. It has been established that when YAG powder is produced by burning, the reaction cup reaches the temperature sufficient for Y3Al5O12 compound synthesis, and that the reducing environment arising due to the combustion of the organic mixture contributes to formation of Ce ions in tricharged state. Further calcination of the resulting powder at the temperature of 450, 900 and 1100 ºC in the open air leads to formation of practically single-phase YAG structure. The radiation spectrum of the obtained YAG:Ce luminescent powders has a wide bandwidth caused by the energy transitions of Ce3+ ion in the garnet structure between 490 and 750 nm at LED excitation at 450 nm. It corresponds to yellow-green radiation that with blue LED radiation creates the sensation of white light. The highest intensity of the yellow-green luminescence is reached by the YAG:Ce powders calcinated at 900 ºC in the open air.
| Mualliflar | Е. Н. Подденежный, Andrei A. BOIKO, Е. Е. Трусова, Ekaterina R. KRAVCOVA |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-09-27 |
| Jild | 2024 |
| Son | 3 |
| Til | en |
| DOI | 10.70189/1992-9498.1624 |
DOI: 10.70189/1992-9498.1624 · Maqolaning asl sahifasi · PDF
The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen…
The purpose of this work in this study, acetylene alcohols containing heteroatomic substituents in their molecular composition- 2-(-thiophen-2-yl)but-3-yn-2-ol, 2-(3-methylthiophen-2-yl)but-3-yn-2-ol…
The purpose of the work is to study the process of synthesis of furfuryl oligomers with high molecular weight at various ratios of furfuryl alcohol and hydroxyl-containing polyether polyol. The influence of the process…
The effect on the surface properties and floatability of chalcocite and enargite after oxidative treatment with hydrogen peroxide (H2O2) in the presence and absence of potassium amylxanthate (PAX) as a collector was…
The purpose of the work is to study the influence of the post-harvest ripening period of wheat grains in open storages on their technological and biochemical properties. The influence of storage of samples of wheat…
A three-dimensional numerical model of the system configurations of various types of solid oxide fuel cells (SOFCs) is used and the effect of parameters on SOFC performance is numerically investigated using COMSOL…
The purpose of this research work is to develop clinker and Portland cement compositions based on Surkhandarya raw materials for the planned construction of a cement plant, as well as to study their physical and…
А reаctive distillаtion system is exаmined to produce for the production of Ethyl tert butyl ether (ETBE) viа etherificаtion of isobutene with ethаnol. Optimizаtion methods using heаt integrаtion аre аlso conducted. The…
The aim of this work is to study the reaction of esterification of liquid olefins with acetic acid in the presence of catalysts and to study the structure and properties of the synthesized saturated esters. 1-hexene…
The aim of this work is the synthesis and study of the physicochemical properties of the complex compound of copper (II) acetylacetonate with a 2-aminobenzimidazole derivative. A heteroligand copper (II) complex…