The article explores the features of the physicochemical and technological processes of clinker synthesis under the conditions of changing the traditional raw material base using non-traditional raw materials and the development of principles for controlling the firing process and ways to improve the quality of clinker. The features of physicochemical processes of clinker burning when using basalt-containing rocks are revealed. It is shown that during the firing of basalt-containing clinker, an increased amount of alumina-ferrite composition melt is formed. Since CaO∙Al203∙Fe203, formed at 1200°C, hydrates faster than CaO•Fe203 of Portland cement, an increase in the content of the aluminoferrite phase in clinker obtained at lower temperatures than traditional compositions, and the enrichment of this phase with iron can favorably affect the properties Portland cement clinker. It is shown that the phase transformations occurring in basalts as a result of reactions and the emerging low-temperature melt intensify the processes of clinker formation. The ideas about the features of the process of phase and structure formation, the formation of the strength of basalt-containing Portland cement have been developed and expanded.
| Mualliflar | Zamira MUKHAMEDBAEVA, Erkin Ilhamovich Kurbanov, Masuda MUHKAMEDBAEVA, Shokhrukh NAIMOV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-03-17 |
| Jild | 2022 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1517 |
DOI: 10.70189/1992-9498.1517 · Maqolaning asl sahifasi
Based on the industrial interest in cyanuric acid derivatives, the aim of the study is to perform a theoretical analysis of cyanuric acid trivinyl esters (2a-4a) and trivinyl cyanurate (2b-4b) using the DFT/defs-TZVP…
One of the priorities for the development of chemical and technological processes in the field of road-building materials and their quality is the production of materials for road markup based on glass micro-beads. The…
The purpose of this research is to study the conditions of thermal curing of unsaturated polyesters (NPEP) using IR spectra and thermal analysis. The curing of synthesized unsaturated polyesters based on the products of…
The cement industries worldwide are currently trying to find alternative cementitious materials for reducing the environmental impact and promoting sustainability. Among them, one is waste glass utilization. A major…
The kiln process in cement plant has the advantage of completely and effectively destroying and burning all organic substances due to high temperature and long residence time, oxygen atmosphere and excellent mixing…
The purpose of this work is the synthesis and study of the structure and properties of mixed-ligand complex compounds UO22+ containing 2-amino-1-methylbenzimidazole (L1) and diisopropyldithiophosphoric acid (L2). A…
The goal was to study the structure of glass ionomer cements (GIC) developed on the basis of glasses of the SiO2-Al2O3-CaO-ZnO-P2O5-CaF2 system. Glass powders with sizes less than 50 μm were sealed with a 40% solution…
The aim of the work is to synthesize a demulsifier and determine its effectiveness in testing oil from the Zharkurgon field under static conditions. Hydrolyzed polyacrylonitrile was used to synthesize the demulsifier…
One of the ways to increase the efficiency of the activation process of baking yeast is the use of waste and by-products of the food industry as nutrient media. The goal of the study was to develop ways to activate…
The aim of the research was modification of commercial sulfonic cation exchanger KU-2-8 with titanium (IV) solutions. The conditions for modifying the cation exchanger depending the concentration of the solution and the…