The influence of the reaction temperature, the ratio of the starting materials, the amount and nature of the solvent and other factors on the polycondensation of melamine with furfural in this present work was investigated. The rate of polycondensation reaction of melamine with furfural was studied at 100, 110, 120, 130 °С, the molar ratio of melamine to furfural was constant 1.5:1.0. It was noticed that at a temperature of 100°C the duration of the polycondensation reaction is 17 hours, the exchange capacity of the ion exchanger is 4,0 mEq/g, with an increase in temperature to 120 °C the exchange capacity reaches 4,8-5,0 mEq/g. On the basis of experimental data, the optimal temperature for the reaction of melamine polycondensation with furfural was 120 °С, at which the reaction course was uniform and an anion-exchange polymer formed in 7,5 hours, characterized by good physical, chemical and mechanical properties.
| Mualliflar | Yuldashev Alisher, Mutalov Shukhrat, Nazirova Rano, Tursunov Tulkun |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2019-11-11 |
| Jild | 2019 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1097 |
DOI: 10.70189/1992-9498.1097 · Maqolaning asl sahifasi
Hydrolysis of rice husk for the purpose of extraction of biopolymers is used to influence the technological and rheological properties of drilling fluids. The dependence of the yield of biopolymers on the type and…
The features of the technological aspects of the production of injection molded polymer materials for the bottom of footwear are investigated. The actions of composite components, especially polyolefins, as part of a…
Presents studies of the processesof interactionof heterogeneous catalytic acetylene and formaldehyd eto butyn-2-diol-1,4 usinga copper-vismut-nickel-kaolin, copper-vismut-cobolt-kaolin, copper-vismut-nickel-bentonit…
Sorption of palladium by sorption materials of various origin from concentrated sulfuric acid solutions has been studied. Elution of palladium from sorption materials was carried out with solutions of ammonia and…
Defined by qualitative reactions availability of flavonoids, saponins and essential oils in liquid extract of “Flegmen”. The qualitative composition of these compounds by method of paper chromatography in system of…
The production technology of a diagnostic agent for determining iodine deficiency has been developed. Established regulatory specifications for the iodine-dextrin capsules, to control the quality of the product. It can…
The composite sorbent-photocatalysts based on Bi2WO6 and reduced graphene oxide have been studied by molecular dynamics methods. The sorption and photocatalytic effect of acetaldehyde in the gaseous phase and the…
A resource and energy saving technology for obtaining white cement has been developed. It has been shown that the introduction of 10% phosphoangihydrate and 20-30% clay and up to 20% sulfoxlicer increases the whiteness…
The protective properties of corrosion inhibitors of steel containing amino and phosphate functional groups in various media have been investigated. The inhibitory and residual protective actions of the organic…
It was shown the possibility of thermal alkaline fertilizers, and a technological scheme has been proposed, and the material balance of the process has been calculated. The process of obtaining thermophosphate…