A sample of sulfur had extracted from sulfur-containing oil and gas processing wastes by washing in water and acetone, dissolved in toluene and appreciated the purity by UV spectroscopy method. Sulfur burning is carried out on the surface of a micromesh substrate that covers the bottom of a glass cylinder connected on top of a water-jet pump to generate air flow. The transparency of the cylinder wall made it possible to visually observe the process of melting and burning sulfur at various pressures of air flow. It was revealed that up to 4-fold increase in air pressure there is a directly proportional increase in the heat of combustion of sulfur. A further increase in the pressure of the flow is accompanied by drawing a certain part of the heat outside the cylindrical cell.
| Mualliflar | Kholmuminov Abdulfatto, Sherniyozov Bobur, Khodzhaeva Nasiba, Akhadov Alisher |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2019-11-11 |
| Jild | 2019 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1100 |
DOI: 10.70189/1992-9498.1100 · Maqolaning asl sahifasi · PDF
The possibility of the most complete extraction of flavonoids from Bidentis tripartite was studied, as a result: 70% ethyl alcohol was chosen as the effective solvent; it was determined that the degree of crushing of…
X-ray studies have established that as a result of the thermal impact on the quartz-pyrophyllite rocks of the Boynxaksa deposit, the decomposition of the pyrophyllite phase begins at temperatures above 600 °C. The…
The main objective of this study is to develop a composition of pasta containing a mixture of ginger, lemon and mint powder, as well as a combination of legumes and cereals with high nutritional value. This will expand…
The article presents the data of experimental studies on testing the technical state of ball cement mills with dimensions 4.0х13.5 m. It is established that the correct selection of the weighted average diameter and the…
The investigated differences in the physicochemical parameters of the foressic oil, obtained from low-grade cottonseed seeds, have revealed the need to improve the current technology for obtaining and processing oils…
The composition of raw batch cement clinker on the basis of non-traditional local raw material – diabase is developed. The calculation of a four-component feed mixture was made and a clinker with activity at steaming…
A derivative of allyl ether 2-chlorophenyl-azo-(21-methyl-51-isopropyl-41-phenol) was synthesized based on the interaction of allyl chloride with 2-chlorophenyl-azo-(21-methyl-51-isopropyl - phenol - 41) in the presence…
Development of technology for the storage and processing of fruits and vegetables and an increase in the degree of consumption of pro-cessed products among the population is an urgent problem of the present…
It is established that in the process of cotton seed kernels rolling the degree of destruction of globules and oil spheros, as well as the degree of lobe grinding, depends exponentially on the moisture and oil content…
The interaction of the acid chlorides of benzoic acid derivatives with 1,1,2-triiodopropen-1-ol-3 produced new compounds, iodine-containing benzoic acid derivatives, whose structure was proved by spectral analysis data…