Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas

Karimov Ikromali Tojimatovich

Kimyo va kimyo texnologiyasi · 2020-yil

Annotatsiya

The mixing of the liquid phases is carried out in the inner and outer zones of the apparatus. The main indicator of the mixing process is estimated by increasing the efficiency of the mass transfer process. This, depends on the size of the holes through which the inert gas passes into the mixing zones and the size of the bubbles emerging from the holes. Mixing the liquid phases is carried out depending on the size of the bubble arising in the interfacial contact surfaces of the bubbles. The article describes a method for determining the interfacial contact surfaces of a bubble depending on the value of gas content in the mixing zones of the apparatus and the size of the bubble. By experimental studies, the size of the bubble was determined depending on the size of the hole and formulas were proposed for determining the size of the bubble.

Maqola ma’lumotlari
MualliflarKarimov Ikromali Tojimatovich
JurnalKimyo va kimyo texnologiyasi
NashriyotТошкент кимё-технология институти
ISSN1992-9498, 2181-1121
Nashr sanasi2020-01-12
Jild2019
Son4
TilIngliz
Ilmiy sohaFarmatsevtika
DOI10.70189/1992-9498.1143
Indeksga qo‘shilgan2026-09-02

Ilmiy soha

Iqtibos keltirish

APAKarimov Ikromali Tojimatovich (2020). Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas. Kimyo va kimyo texnologiyasi, 2019(4). https://doi.org/10.70189/1992-9498.1143
GOST (OAK)Karimov Ikromali Tojimatovich Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas // Kimyo va kimyo texnologiyasi. – 2020. – T. 2019, № 4. – DOI: 10.70189/1992-9498.1143.
MLAKarimov Ikromali Tojimatovich. “Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas.” Kimyo va kimyo texnologiyasi, 2019(4), 2020. https://doi.org/10.70189/1992-9498.1143
ChicagoKarimov Ikromali Tojimatovich. “Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas.” Kimyo va kimyo texnologiyasi, 2019(4) (2020). https://doi.org/10.70189/1992-9498.1143
HarvardKarimov Ikromali Tojimatovich (2020) ‘Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas’, Kimyo va kimyo texnologiyasi, 2019(4). https://doi.org/10.70189/1992-9498.1143
BibTeX
@article{karimovikromalitojimatovich2020,
  title = {Interfacial contact surface and the size of the bubble in a bubbling extractor when mixing liquid phases with an inert gas},
  author = {Karimov Ikromali Tojimatovich},
  journal = {Kimyo va kimyo texnologiyasi},
  year = {2020},
  volume = {2019},
  number = {4},
  doi = {10.70189/1992-9498.1143},
  url = {https://doi.org/10.70189/1992-9498.1143}
}

Boshqa maqola uchun iqtibos tayyorlash

Kimyo va kimyo texnologiyasi jurnalidan boshqa maqolalar

Kimyo va kimyo texnologiyasi — barcha maqolalar · 2020-yil arxivi

Farmatsevtika sohasidagi boshqa maqolalar

Farmatsevtika sohasidagi OAK jurnallari