In this work, polymer composite materials based on polypropylene (PP) and layered silicates were obtained by melt mixing method. The research looked into the effect of the amount of compatibilizer on thermal and mechanical properties of composites based on two types of layered silicates with modifiers of different interlayer densities, with maleic anhydride grafted polypropylene (MA-p-PP), which was used as a compatibilizer. The compatibilizer was changed to 3, 6, 9 and 12 % while the amount of filler in the composite remained at 3 %. Cloisite15A, a layered silicate with a higher modifier density, produced intercalated structures, while Cloisite20A, with a relatively lower modifier density, produced mostly exfoliated nanocomposites. Forming of the nanostructure led to a significant increase in thermal stability (50 % weight loss was observed at temperatures of 360 and 430 °C for polypropylene and its based nano-composites, respectively). The analysis of the mechanical properties of nanocomposites showed that the elastic modulus increases by 15–20 %, and this effect is more expressive for exfoliated structures, however, the yield stress remains practically unchanged, and a significant decrease in elastic deformation is observed.
| Mualliflar | Q. N. Berdinazarov, E. O. Khakberdiev, N. F. Normurodov, N. Z. Dusiyorov, N. R. Ashurov |
|---|---|
| Jurnal | Илм-фан ва инновацион ривожланиш |
| Nashr sanasi | 2023-04-14 |
| Jild | 6 |
| Son | 2 |
| Betlar | 42-52 |
| Til | en |
| DOI | 10.36522/2181-9637-2023-2-5 |
DOI: 10.36522/2181-9637-2023-2-5 · Maqolaning asl sahifasi
The article discusses types of insulating layers used for outerwear, i.e. materials made with natural, synthetic and mixed fibers, their thickness, surface density, suitability for certain temperatures, advantages and…
The supply of modern equipment and technology plays an important role in the production of quality products at textile enterprises. Improving the quality of products in turn contributes to expanding the range of…
This paper describes the use of a current transformer to monitor and control the reactive power of an induction motor. The current transformer is placed between the induction motor stator windings and the main winding…
With detailed large-scale topographic surveys of cities, especially when photographing executive master plans of industrial facilities, geodetic services perform work on measuring not only ground sites, but also - on…
The article discusses a technical solution for improvement of alignment measurement tools by means of a laser beam as a reference baseline and photoelectrical recorder of high accuracy, wide range and capacity. It also…
This article provides information about cocoon automatic- and mechanical cocoon-reeling machines in silk manufacturing enterprises of our republic, as well as the state of cocoon cultivation. The technological…
When using the overalls, metabolic products accumulate under it - sweat in the form of a vapour-gas and wet phase. To increase productivity of workers and maintain a comfortable body ambience, that is, an optimal…
The article reveals the relevance of introducing advanced technologies into the process of conducting theoretical and practical classes for metrologists in the light of a radical reform of the education system in…
This article presents calculation of cotton cleaning efficiency of the cotton ginning plant for cotton of low grades. In particular, effective solutions are offered to eliminate the forces and damages affecting cotton…
The article discusses the fields of application and content of virtual reality systems, the results of a comparative analysis of virtual educational environment platforms, and their role in presenting educational…