The article describes a method for producing a polymer composite material based on an epoxy matrix. Complex mechanical and technological tests of the composite were carried out. It is assumed that the constituent components must conform and not dissolve or absorb into each other. Composite materials should have the properties that cannot be separated from the components. Only under these conditions will they be able to be used. Polymer materials also belong to composites, since in addition to the main component (polymer), various fillers, dyes and other substances are used. Polymers are substances consisting of an elementary unit in the same structure as macromolecular ones. The chemical composition of the polymer is expressed by this structural unit, and the number of compounds in the macromolecular chain is called the degree of polymerization. A complex mechanical testing of composite materials based on epoxy matrix with different fillers. It was found that the samples of polymer composite materials, reinforced together with inflatable cotton and fiberglass fibers, have the highest mechanical and technological properties. Based on the analysis of mechanical and technological properties, it is recommended to make linings of passenger carriages made from polymeric composite materials on the basis of the epoxy matrix reinforced with cotton and fiberglass.
| Mualliflar | Yadgor Ruzmetov, Olmos Zainiddinov, Muhammad Valiev |
|---|---|
| Jurnal | Илм-фан ва инновацион ривожланиш |
| Nashr sanasi | 2019-09-04 |
| Jild | 2 |
| Son | 4 |
| Betlar | 88-96 |
| Til | tg |
| DOI | 10.36522/2181-9637-2019-4-11 |
DOI: 10.36522/2181-9637-2019-4-11 · Maqolaning asl sahifasi
The following work presents the results of the study of methods for producing effective zeolite and aluminum oxide adsorbents for the condensation of various process streams, including liquefied petroleum and other…
The global economy is experiencing a transition from the fifth to the sixth stage of the technological structure. Relating changes impact the future development processes of both the world and individual economies…
The increasing requirements for polymeric materials contribute to the expansion of the performance characteristics of products based on polymers. One of the ways to obtain new materials is the mixture of polymers in the…
The article discusses the methodology and technical solution of recycling fish farm waste using closed-water supply systems by means of a basin method, which ensures their use as a source of liquid fertilizer and the…
Gamma-flaw detectors Gammarid-192/120М with ionizing radiation sources of iridium-192 (Ir-192) are widely used for the nondestructive testing (NDT) of various products. Currently, the development and manufacturing of…
The article focuses on crowdfunding platform, which is widely used in international practice with funding of currently created innovation projects and developments. It highlights the importance of this platform in…
The article summarizes the agro-technical method of pest control, envisaging an annual rotation – «1 year of rice-growing followed by 1 year of soybean-growing» instead of the former approach – «3 years of rice growing…
The article presents the results of studies to determine the productivity of A2 and AD1 genomic amphidiploids hybrids of cotton. Different indicators were gained based on the analysis of the obtained data on the…
Elimination of permanent defects of the anterior wall of the trachea is a crucial issue, as it is the subject of research and discussion of thoracic surgeons, plastic surgeons and otolaryngologists. The authors…